In this review, we will be comparing PB-1000 and Bronze W10, two Powered Subwoofer speakers from SVS and Monitor Audio . Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-1000 and Monitor Audio Bronze W10 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS PB-1000 and Monitor Audio Bronze W10 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.SVS PB-1000and Monitor Audio Bronze W10 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
PB-1000 has a frequency range of 19-270 Hz whereas Bronze W10 has a frequency range of 29-150 Hz. With a minimum frequency of 19Hz, the PB-1000 can go significantly deeper on the low side and provide stronger bass compared to the Bronze W10's min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-1000 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the Monitor Audio Bronze W10 have Passive Radiator type enclosure. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-1000's and Monitor Audio Bronze W10's external dimensions. SVS PB-1000 has external dimensions of 480.0 x 381.0 x 532.0mm ( 18-7/8 x 15 x 20-15/16inch) whereas Monitor Audio Bronze W10 has external dimensions of 361.0 x 321.0 x 405.0mm ( 14-3/16 x 12-5/8 x 15-15/16inch) .
SVS PB-1000 is clearly the larger of the two speakers. Its body is 60mm wider, 119mm taller and 127mm deeper than Monitor Audio Bronze W10.
Below you can see the front view size comparison of SVS PB-1000 and Monitor Audio Bronze W10 in scale.
Comparison image of SVS PB-1000 and Monitor Audio Bronze W10 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-1000 is approximately 2026.9cm2 / 314.2inch2 and base area of the Monitor Audio Bronze W10 is approximately 1300.1cm2 / 201.5inch2. The PB-1000 requires 56% more surface area than the Bronze W10 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-1000 weighs 20.91kg / 46lbs and the Monitor Audio Bronze W10 weighs 13.44kg / 29.6lbs. This makes the PB-1000 56% heavier than the Bronze W10.
Here is a comparison of how PB-1000 and Bronze W10's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-1000?
Here are the items that are included inside the box of PB-1000:
Powered subwooferGrille (installed)6-feet AC power cordOwners ManualImportant Safety Instructions
What's in the Box of Monitor Audio Bronze W10?
Here are the items that come with the Bronze W10:
Powered subwooferGrille6.5-feet AC power cord10-feet Mono-minijack cable4 Rubber feetQuick Start GuideImportant Safety Instructions
 Low Frequency Response |
19 Hz
vs
29 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
150k Hz
|
Generates higher frequency |
 Price per pair* |
499USD
vs
975USD
|
costs less (*prices may change depending on the seller, location and time) |
 Height |
361mm
vs
480mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1300cm2 (321x405mm)
vs
2026cm2 (381x532mm)
|
Takes less floor space |
| General |
SVS PB-1000 |
Monitor Audio Bronze W10 |
| Brand |
SVS |
Monitor Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
220 watts |
| Frequency Response |
19-270 Hz |
29-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
220-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Fiber-composite |
C-CAM |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
50-160 Hz and 80 Hz |
n/a |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
480.0mm (18.9") |
361.0mm (14.2") |
| Width |
381.0mm (15") |
321.0mm (12.6") |
| Depth |
532.0mm (20.9") |
405.0mm (15.9") |
| Weight |
20.91kg (46lbs) |
13.44kg (29.6lbs) |
| Enclosure |
Bass Reflex |
Passive Radiator |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |