In this review, we will be comparing PB-1000 and Dynamo 1600X, two Powered Subwoofer speakers from SVS and MartinLogan. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-1000 and MartinLogan 1600X first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS PB-1000 and MartinLogan 1600X compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-1000and MartinLogan 1600X have a single woofer setup however the SVS PB-1000's woofer is 10-inch whereas the MartinLogan 1600X features a 15-inch woofer.
Frequency Response
PB-1000 has a frequency range of 19-270 Hz whereas Dynamo 1600X has a frequency range of 20-200 Hz. With a minimum frequency of 19Hz, the PB-1000 can go slightly deeper then the Dynamo 1600X's min frequency of 20Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-1000 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the MartinLogan 1600X have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-1000's and MartinLogan 1600X's external dimensions. SVS PB-1000 has external dimensions of 480.0 x 381.0 x 532.0mm ( 18-7/8 x 15 x 20-15/16inch) whereas MartinLogan 1600X has external dimensions of 510.0 x 456.0 x 470.0mm ( 20-1/16 x 17-15/16 x 18-1/2inch) .
SVS PB-1000 is 75mm narrower and 30mm shorter than MartinLogan 1600X but it is also 62mm deeper.
Below you can see the front view size comparison of SVS PB-1000 and MartinLogan 1600X in scale.
Comparison image of SVS PB-1000 and MartinLogan 1600X Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-1000 is approximately 2026.9cm2 / 314.2inch2 and base area of the MartinLogan 1600X is approximately 2143.2cm2 / 332.2inch2. The PB-1000 requires 5% less surface area than the Dynamo 1600X which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-1000 weighs 20.91kg / 46lbs and the MartinLogan 1600X weighs 25.91kg / 57lbs. This makes the Dynamo 1600X 24% heavier than the PB-1000.
Here is a comparison of how PB-1000 and Dynamo 1600X's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-1000?
Here are the items that are included inside the box of PB-1000:
Powered subwooferGrille (installed)6-feet AC power cordOwners ManualImportant Safety Instructions
What's in the Box of MartinLogan 1600X?
Here are the items that come with the Dynamo 1600X:
Powered subwooferGrille6.5-feet AC power cordUser-feets Manual
 Low Frequency Response |
19 Hz
vs
20 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
200k Hz
|
Generates higher frequency |
 Height |
480mm
vs
510mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
2026cm2 (381x532mm)
vs
2143cm2 (456x470mm)
|
Takes less floor space |
 Price per pair* |
499USD
vs
2000USD
|
costs less (*prices may change depending on the seller, location and time) |
| Woofer Size |
15 inches
vs
10 inches
|
Larger woofer |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
SVS PB-1000 |
MartinLogan Dynamo 1600X |
| Brand |
SVS |
MartinLogan |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
900 watts |
| Frequency Response |
19-270 Hz |
20-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
900-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
15" |
| Woofer Composition |
Fiber-composite |
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
50-160 Hz and 80 Hz |
n/a |
| Firing Direction |
front |
bottom |
Physical Specs |
|
|
| Height |
480.0mm (18.9") |
510.0mm (20.1") |
| Width |
381.0mm (15") |
456.0mm (18") |
| Depth |
532.0mm (20.9") |
470.0mm (18.5") |
| Weight |
20.91kg (46lbs) |
25.91kg (57lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Available Colors |
n/a |
Satin Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
3 Yrs w/ Registration |
| Labor Warranty |
5 Years |
3 Yrs w/ Registration |