In this review, we will be comparing SB-1000 and R-112SW, two Powered Subwoofer speakers from SVS and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS SB-1000 and Klipsch R-112SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS SB-1000 and Klipsch R-112SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.SVS SB-1000and Klipsch R-112SW have the same driver set up: Both subwoofers have 1 x 12" drivers.
Frequency Response
SB-1000 has a frequency range of 24-260 Hz whereas R-112SW has a frequency range of 24-125 Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS SB-1000 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch R-112SW have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS SB-1000's and Klipsch R-112SW's external dimensions. SVS SB-1000 has external dimensions of 343.0 x 332.0 x 397.0mm ( 13-1/2 x 13-1/16 x 15-5/8inch) whereas Klipsch R-112SW has external dimensions of 442.0 x 391.0 x 532.0mm ( 17-3/8 x 15-3/8 x 20-15/16inch) .
Klipsch R-112SW is clearly the larger of the two speakers. Its body is 59mm wider, 99mm taller and 135mm deeper than SVS SB-1000.
Below you can see the front view size comparison of SVS SB-1000 and Klipsch R-112SW in scale.
Comparison image of SVS SB-1000 and Klipsch R-112SW Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS SB-1000 is approximately 1318.0cm2 / 204.3inch2 and base area of the Klipsch R-112SW is approximately 2080.1cm2 / 322.4inch2. The SB-1000 requires 37% less surface area than the R-112SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS SB-1000 weighs 12.27kg / 27lbs and the Klipsch R-112SW weighs 22.16kg / 48.8lbs. This makes the R-112SW 81% heavier than the SB-1000.
Here is a comparison of how SB-1000 and R-112SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS SB-1000?
Here are the items that are included inside the box of SB-1000:
Powered subwooferGrille (installed)6-feet AC power cordOwners ManualImportant Safety Instructions
What's in the Box of Klipsch R-112SW?
Here are the items that come with the R-112SW:
Powered subwooferGrille8.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 High Frequency Response |
260k Hz
vs
125k Hz
|
Generates higher frequency |
 Height |
343mm
vs
442mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1318cm2 (332x397mm)
vs
2080cm2 (391x532mm)
|
Takes less floor space |
 Price per pair* |
399USD
vs
500USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
SVS SB-1000 |
Klipsch Reference R-112SW |
| Brand |
SVS |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
300 watts |
| Frequency Response |
24-260 Hz |
24-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
12" |
| Woofer Composition |
Not given |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
50-160 Hz and 80 Hz |
n/a |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
343.0mm (13.5") |
442.0mm (17.4") |
| Width |
332.0mm (13.1") |
391.0mm (15.4") |
| Depth |
397.0mm (15.6") |
532.0mm (20.9") |
| Weight |
12.27kg (27lbs) |
22.16kg (48.8lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |