In this review, we will be comparing Elite ES10 and RP-1000SW, two Powered Subwoofer speakers from Polk Audio and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk Signature Elite ES10 and Klipsch RP-1000SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Polk Signature Elite ES10 and Klipsch RP-1000SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Polk Signature Elite ES10and Klipsch RP-1000SW have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Elite ES10 has a frequency range of 28-250 Hz whereas RP-1000SW has a frequency range of 19-131 Hz. With a minimum frequency of 19Hz, the RP-1000SW can go significantly deeper on the low side and provide stronger bass compared to the Elite ES10's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
Polk Signature Elite ES10
High Frequency
Subwoofer Speakers
Polk Signature Elite ES10
Cabinet Type
Both Polk Signature Elite ES10 and Klipsch RP-1000SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Polk Signature Elite ES10 double Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Signature Elite ES10's and Klipsch RP-1000SW's external dimensions. Polk Signature Elite ES10 has external dimensions of 439.0 x 332.0 x 469.0mm ( 17-1/4inch x 13-1/16inch x 18-7/16inch ) whereas Klipsch RP-1000SW has external dimensions of 423.0 x 381.0 x 635.0mm ( 16-5/8inch x 15inch x 25inch ) .
Polk Signature Elite ES10 is 49mm narrower and 166mm less deeper than Klipsch RP-1000SW but it is also 16mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk Signature Elite ES10 is approximately 1557.1cm2 / 241.4inch2 and base area of the Klipsch RP-1000SW is approximately 2419.4cm2 / 375.0inch2. The Elite ES10 requires 36% less surface area than the RP-1000SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk Signature Elite ES10 weighs 17.73kg / 39lbs and the Klipsch RP-1000SW weighs 25.77kg / 56.7lbs. This makes the RP-1000SW 45% heavier than the Elite ES10.
Here is a comparison of how Elite ES10 and RP-1000SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
Polk Signature Elite ES10
 High Frequency Response |
250k Hz
vs
131k Hz
|
Generates higher frequency |
 Base Surface Area |
1557cm2 (332x469mm)
vs
2419cm2 (381x635mm)
|
Takes less floor space |
 Price per pair* |
649USD
vs
749USD
|
costs less (*prices may change depending on the seller, location and time) |
 Low Frequency Response |
19 Hz
vs
28 Hz
|
Generates deeper bass |
 Height |
423mm
vs
439mm
|
Easier to fit in smaller spaces |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Polk Signature Elite ES10 |
Klipsch Reference Premiere RP-1000SW |
| Brand |
Polk Audio |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
300 watts |
| Frequency Response |
28-250 Hz |
19-131 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
n/a |
600-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Mineral-filled polypropylene |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
439.0mm (17.3") |
423.0mm (16.7") |
| Width |
332.0mm (13.1") |
381.0mm (15") |
| Depth |
469.0mm (18.5") |
635.0mm (25") |
| Weight |
17.73kg (39lbs) |
25.77kg (56.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF with Vinyl |
| Available Colors |
n/a |
Ebony |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
5 years |
| Labor Warranty |
3 Years |
5 years |