In this review, we will be comparing HTS 10 and Minx X201, two Powered Subwoofer speakers from Polk Audio and Cambridge Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk HTS 10 and Cambridge Audio Minx X201 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Polk HTS 10 and Cambridge Audio Minx X201 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Polk HTS 10and Cambridge Audio Minx X201 have a single woofer setup however the Polk HTS 10's woofer is 10-inch whereas the Cambridge Audio Minx X201 features a 6.5-inch woofer.
Frequency Response
HTS 10 has a frequency range of 30-120 Hz whereas Minx X201 has a frequency range of 36-200 Hz. With a minimum frequency of 30Hz, the HTS 10 can go significantly deeper on the low side and provide stronger bass compared to the Minx X201's min frequency of 36Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
Cambridge Audio Minx X201
High Frequency
Subwoofer Speakers
Cambridge Audio Minx X201
Cabinet Type
The Polk HTS 10 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the Cambridge Audio Minx X201 have Passive Radiator type enclosure. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk HTS 10's and Cambridge Audio Minx X201's external dimensions. Polk HTS 10 has external dimensions of 423.0 x 385.0 x 459.0mm ( 16-5/8 x 15-1/8 x 18-1/16inch) whereas Cambridge Audio Minx X201 has external dimensions of 220.0 x 210.0 x 256.0mm ( 8-5/8 x 8-1/4 x 10-1/16inch) .
Polk HTS 10 is clearly the larger of the two speakers. Its body is 175mm wider, 203mm taller and 203mm deeper than Cambridge Audio Minx X201.
Below you can see the front view size comparison of Polk HTS 10 and Cambridge Audio Minx X201 in scale.
Comparison image of Polk HTS 10 and Cambridge Audio Minx X201 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk HTS 10 is approximately 1767.2cm2 / 273.9inch2 and base area of the Cambridge Audio Minx X201 is approximately 537.6cm2 / 83.3inch2. The HTS 10 requires 229% more surface area than the Minx X201 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk HTS 10 weighs 17.16kg / 37.8lbs and the Cambridge Audio Minx X201 weighs 5.00kg / 11lbs. This makes the HTS 10 243% heavier than the Minx X201.
Here is a comparison of how HTS 10 and Minx X201's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
Cambridge Audio Minx X201
What's in the Box of Polk HTS 10?
Here are the items that are included inside the box of HTS 10:
Powered subwooferGrille8-feet AC power cordOwners ManualOnline Product Registration sheet
What's in the Box of Cambridge Audio Minx X201?
Here are the items that come with the Minx X201:
Powered subwooferGrille (installed)6-feet AC power cordInstallation GuideImportant Safety Instructions
 Woofer Size |
10 inches
vs
6.5 inches
|
Larger woofer |
| Low Frequency Response |
30 Hz
vs
36 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
120k Hz
|
Generates higher frequency |
 Passive Radiator |
two 6.5-inch
vs
None
|
Increases the bass performance |
 Height |
220mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
537cm2
vs
1767cm2
|
Takes less floor space |
| General |
Polk Audio HTS 10 |
Cambridge Audio Minx X201 |
| Brand |
Polk Audio |
Cambridge Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
100 watts |
200 watts |
| Frequency Response |
30-120 Hz |
36-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
200-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
6.5" |
| Woofer Composition |
Polypropylene |
Aluminum |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
423.0mm (16.7") |
220.0mm (8.7") |
| Width |
385.0mm (15.2") |
210.0mm (8.3") |
| Depth |
459.0mm (18.1") |
256.0mm (10.1") |
| Weight |
17.16kg (37.8lbs) |
5.00kg (11lbs) |
| Enclosure |
Bass Reflex |
Passive Radiator |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
3 Years |
| Labor Warranty |
3 Years |
3 Years |