In this review, we will be comparing Bronze W10 and Debut 2.0 SUB3010, two Powered Subwoofer speakers from Monitor Audio and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Monitor Audio Bronze W10 and ELAC Debut 2.0 SUB3010 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Monitor Audio Bronze W10 and ELAC Debut 2.0 SUB3010 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Monitor Audio Bronze W10and ELAC Debut 2.0 SUB3010 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Bronze W10 has a frequency range of 29-150 Hz whereas Debut 2.0 SUB3010 has a frequency range of 28-150 Hz. With a minimum frequency of 28Hz, the Debut 2.0 SUB3010 can go slightly deeper then the Bronze W10's min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Monitor Audio Bronze W10 has a Passive Radiator type cabinet. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs. On the other hand the ELAC Debut 2.0 SUB3010 have Passive radiator type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze W10's and ELAC Debut 2.0 SUB3010's external dimensions. Monitor Audio Bronze W10 has external dimensions of 361.0 x 321.0 x 405.0mm ( 14-3/16 x 12-5/8 x 15-15/16inch) whereas ELAC Debut 2.0 SUB3010 has external dimensions of 374.0 x 355.0 x 383.0mm ( 14-11/16 x 13-15/16 x 15-1/16inch) .
Monitor Audio Bronze W10 is 34mm narrower and 13mm shorter than ELAC Debut 2.0 SUB3010 but it is also 22mm deeper.
Below you can see the front view size comparison of Monitor Audio Bronze W10 and ELAC Debut 2.0 SUB3010 in scale.
Comparison image of Monitor Audio Bronze W10 and ELAC Debut 2.0 SUB3010 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze W10 is approximately 1300.1cm2 / 201.5inch2 and base area of the ELAC Debut 2.0 SUB3010 is approximately 1359.7cm2 / 210.8inch2. The Bronze W10 requires 4% less surface area than the Debut 2.0 SUB3010 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Monitor Audio Bronze W10 weighs 13.44kg / 29.6lbs and the ELAC Debut 2.0 SUB3010 weighs 14.59kg / 32.1lbs. This makes the Debut 2.0 SUB3010 9% heavier than the Bronze W10.
Here is a comparison of how Bronze W10 and Debut 2.0 SUB3010's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Monitor Audio Bronze W10?
Here are the items that are included inside the box of Bronze W10:
Powered subwooferGrille6.5-feet AC power cord10-feet Mono-minijack cable4 Rubber feetQuick Start GuideImportant Safety Instructions
What's in the Box of ELAC Debut 2.0 SUB3010?
Here are the items that come with the Debut 2.0 SUB3010:
Powered subwoofer9-feet AC power cord4 Spikes4 Hex-nutsOperating Instructions
 Height |
361mm
vs
374mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1300cm2 (321x405mm)
vs
1359cm2 (355x383mm)
|
Takes less floor space |
 Low Frequency Response |
28 Hz
vs
29 Hz
|
Generates deeper bass |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Price per pair* |
650USD
vs
975USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Bronze W10 |
ELAC Debut 2.0 SUB3010 |
| Brand |
Monitor Audio |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
220 watts |
200 watts |
| Frequency Response |
29-150 Hz |
28-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
220-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
C-CAM |
Doped Paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
361.0mm (14.2") |
374.0mm (14.7") |
| Width |
321.0mm (12.6") |
355.0mm (14") |
| Depth |
405.0mm (15.9") |
383.0mm (15.1") |
| Weight |
13.44kg (29.6lbs) |
14.59kg (32.1lbs) |
| Enclosure |
Passive Radiator |
Passive radiator |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
1 Year |
| Labor Warranty |
5 Years |
1 Year |