In this review, we will be comparing RP-1600SW and Dynamo 1600X, two Powered Subwoofer speakers from Klipsch and MartinLogan. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1600SW and MartinLogan 1600X first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RP-1600SW and MartinLogan 1600X compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1600SWand MartinLogan 1600X have a single woofer setup however the Klipsch RP-1600SW's woofer is 16-inch whereas the MartinLogan 1600X features a 15-inch woofer.
Frequency Response
RP-1600SW has a frequency range of 14.5-175 Hz whereas Dynamo 1600X has a frequency range of 20-200 Hz. With a minimum frequency of 15Hz, the RP-1600SW can go significantly deeper on the low side and provide stronger bass compared to the Dynamo 1600X's min frequency of 20Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch RP-1600SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the MartinLogan 1600X have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1600SW's and MartinLogan 1600X's external dimensions. Klipsch RP-1600SW has external dimensions of 596.0 x 597.0 x 696.0mm ( 23-7/16inch x 23-1/2inch x 27-3/8inch ) whereas MartinLogan 1600X has external dimensions of 510.0 x 456.0 x 470.0mm ( 20-1/16 x 17-15/16 x 18-1/2inch) .
Klipsch RP-1600SW is clearly the larger of the two speakers. Its body is 141mm wider, 86mm taller and 226mm deeper than MartinLogan 1600X.
Below you can see the front view size comparison of Klipsch RP-1600SW and MartinLogan 1600X in scale.
Comparison image of Klipsch RP-1600SW and MartinLogan 1600X Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1600SW is approximately 4155.1cm2 / 644.0inch2 and base area of the MartinLogan 1600X is approximately 2143.2cm2 / 332.2inch2. The RP-1600SW requires 94% more surface area than the Dynamo 1600X which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1600SW weighs 50.00kg / 110lbs and the MartinLogan 1600X weighs 25.91kg / 57lbs. This makes the RP-1600SW 93% heavier than the Dynamo 1600X.
Here is a comparison of how RP-1600SW and Dynamo 1600X's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
Woofer Size |
16 inches
vs
15 inches
|
Larger woofer |
Low Frequency Response |
15 Hz
vs
20 Hz
|
Generates deeper bass |
Price per pair* |
1799USD
vs
2000USD
|
costs less (*prices may change depending on the seller, location and time) |
High Frequency Response |
200k Hz
vs
175k Hz
|
Generates higher frequency |
App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
Height |
510mm
vs
596mm
|
Easier to fit in smaller spaces |
Base Surface Area |
2143cm2 (456x470mm)
vs
4155cm2 (597x696mm)
|
Takes less floor space |
General |
Klipsch Reference Premiere RP-1600SW |
MartinLogan Dynamo 1600X |
Brand |
Klipsch |
MartinLogan |
Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
Max Amplifier Output |
800 watts |
900 watts |
Frequency Response |
14.5-175 Hz |
20-200 Hz |
Amplifier |
|
|
Watts RMS (Continuous) |
800-watt RMS |
900-watt RMS |
Watts Peak (Max) |
1600-watt RMS |
n/a |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
16" |
15" |
Woofer Composition |
Cerametallic |
Polypropylene |
Tweeter Size |
- |
- |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Firing Direction |
front |
bottom |
Physical Specs |
|
|
Height |
596.0mm (23.5") |
510.0mm (20.1") |
Width |
597.0mm (23.5") |
456.0mm (18") |
Depth |
696.0mm (27.4") |
470.0mm (18.5") |
Weight |
50.00kg (110lbs) |
25.91kg (57lbs) |
Enclosure |
Bass Reflex |
Acoustic Suspension |
Finish |
MDF with Vinyl |
n/a |
Available Colors |
Ebony |
Satin Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
Parts Warranty |
5 years |
3 Yrs w/ Registration |
Labor Warranty |
5 years |
3 Yrs w/ Registration |