In this review, we will be comparing RP-1400SW and RW-100SW, two Powered Subwoofer speakers by Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1400SW and Klipsch RW-100SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RP-1400SW and Klipsch RW-100SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1400SWand Klipsch RW-100SW have a single woofer setup however the Klipsch RP-1400SW's woofer is 14-inch whereas the Klipsch RW-100SW features a 10-inch woofer.
Frequency Response
RP-1400SW has a frequency range of 16-141 Hz whereas RW-100SW has a frequency range of 27-125 Hz. With a minimum frequency of 16Hz, the RP-1400SW can go significantly deeper on the low side and provide stronger bass compared to the RW-100SW's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch RP-1400SW and Klipsch RW-100SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1400SW's and Klipsch RW-100SW's external dimensions. Klipsch RP-1400SW has external dimensions of 542.0 x 508.0 x 653.0mm ( 21-5/16inch x 20inch x 25-11/16inch ) whereas Klipsch RW-100SW has external dimensions of 383.0 x 383.0 x 472.0mm ( 15-1/16inch x 15-1/16inch x 18-9/16inch ) .
Klipsch RP-1400SW is clearly the larger of the two speakers. Its body is 125mm wider, 159mm taller and 181mm deeper than Klipsch RW-100SW.
Below you can see the front view size comparison of Klipsch RP-1400SW and Klipsch RW-100SW in scale.
Comparison image of Klipsch RP-1400SW and Klipsch RW-100SW Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1400SW is approximately 3317.2cm2 / 514.2inch2 and base area of the Klipsch RW-100SW is approximately 1807.8cm2 / 280.2inch2. The RP-1400SW requires 83% more surface area than the RW-100SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1400SW weighs 38.05kg / 83.7lbs and the Klipsch RW-100SW weighs 17.73kg / 39lbs. This makes the RP-1400SW 115% heavier than the RW-100SW.
Here is a comparison of how RP-1400SW and RW-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
14 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
141k Hz
vs
125k Hz
|
Generates higher frequency |
 Height |
383mm
vs
542mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1807cm2 (383x472mm)
vs
3317cm2 (508x653mm)
|
Takes less floor space |
 Price per pair* |
350USD
vs
1399USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference Premiere RP-1400SW |
Klipsch Reference Wireless RW-100SW |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
500 watts |
225 watts |
| Frequency Response |
16-141 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
225-watt RMS |
| Watts Peak (Max) |
1000-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
14" |
10" |
| Woofer Composition |
Cerametallic |
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
542.0mm (21.3") |
383.0mm (15.1") |
| Width |
508.0mm (20") |
383.0mm (15.1") |
| Depth |
653.0mm (25.7") |
472.0mm (18.6") |
| Weight |
38.05kg (83.7lbs) |
17.73kg (39lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
2 Years |
| Labor Warranty |
5 years |
2 Years |