In this review, we will be comparing RP-1000SW and HTS 12, two Powered Subwoofer speakers from Klipsch and Polk Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1000SW and Polk HTS 12 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RP-1000SW and Polk HTS 12 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1000SWand Polk HTS 12 have a single woofer setup however the Klipsch RP-1000SW's woofer is 10-inch whereas the Polk HTS 12 features a 12-inch woofer.
Frequency Response
RP-1000SW has a frequency range of 19-131 Hz whereas HTS 12 has a frequency range of 28-120 Hz. With a minimum frequency of 19Hz, the RP-1000SW can go significantly deeper on the low side and provide stronger bass compared to the HTS 12's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch RP-1000SW and Polk HTS 12 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Polk HTS 12 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1000SW's and Polk HTS 12's external dimensions. Klipsch RP-1000SW has external dimensions of 423.0 x 381.0 x 635.0mm ( 16-5/8inch x 15inch x 25inch ) whereas Polk HTS 12 has external dimensions of 478.0 x 437.0 x 510.0mm ( 18-13/16 x 17-3/16 x 20-1/16inch) .
Klipsch RP-1000SW is 56mm narrower and 55mm shorter than Polk HTS 12 but it is also 125mm deeper.
Below you can see the front view size comparison of Klipsch RP-1000SW and Polk HTS 12 in scale.
Comparison image of Klipsch RP-1000SW and Polk HTS 12 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1000SW is approximately 2419.4cm2 / 375.0inch2 and base area of the Polk HTS 12 is approximately 2228.7cm2 / 345.4inch2. The RP-1000SW requires 9% more surface area than the HTS 12 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1000SW weighs 25.77kg / 56.7lbs and the Polk HTS 12 weighs 22.68kg / 49.9lbs. This makes the RP-1000SW 14% heavier than the HTS 12.
Here is a comparison of how RP-1000SW and HTS 12's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
19 Hz
vs
28 Hz
|
Generates deeper bass |
 High Frequency Response |
131k Hz
vs
120k Hz
|
Generates higher frequency |
 Height |
423mm
vs
478mm
|
Easier to fit in smaller spaces |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 Base Surface Area |
2228cm2 (437x510mm)
vs
2419cm2 (381x635mm)
|
Takes less floor space |
 Price per pair* |
549USD
vs
749USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference Premiere RP-1000SW |
Polk Audio HTS 12 |
| Brand |
Klipsch |
Polk Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
200 watts |
| Frequency Response |
19-131 Hz |
28-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
600-watt RMS |
400-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Cerametallic |
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
423.0mm (16.7") |
478.0mm (18.8") |
| Width |
381.0mm (15") |
437.0mm (17.2") |
| Depth |
635.0mm (25") |
510.0mm (20.1") |
| Weight |
25.77kg (56.7lbs) |
22.68kg (49.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
3 Years |
| Labor Warranty |
5 years |
3 Years |