In this review, we will be comparing KF92 and Debut 2.0 SUB3010, two Powered Subwoofer speakers from KEF and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF KF92 and ELAC Debut 2.0 SUB3010 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the KEF KF92 and ELAC Debut 2.0 SUB3010 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.KEF KF92 and ELAC Debut 2.0 SUB3010 have a totally different setup: the KEF KF92 features 2 x 9-inch drivers whereas the Debut 2.0 SUB3010 features 1 x 10-inch drivers.
Frequency Response
KF92 has a frequency range of 11-200 Hz whereas Debut 2.0 SUB3010 has a frequency range of 28-150 Hz. With a minimum frequency of 11Hz, the KF92 can go significantly deeper on the low side and provide stronger bass compared to the Debut 2.0 SUB3010's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The KEF KF92 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the ELAC Debut 2.0 SUB3010 have Passive radiator type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF KF92's and ELAC Debut 2.0 SUB3010's external dimensions. KEF KF92 has external dimensions of 353.0 x 331.0 x 362.0mm ( 13-7/8 x 13 x 14-1/4inch) whereas ELAC Debut 2.0 SUB3010 has external dimensions of 374.0 x 355.0 x 383.0mm ( 14-11/16 x 13-15/16 x 15-1/16inch) .
ELAC Debut 2.0 SUB3010 is clearly the larger of the two speakers. Its body is 24mm wider, 21mm taller and 21mm deeper than KEF KF92.
Below you can see the front view size comparison of KEF KF92 and ELAC Debut 2.0 SUB3010 in scale.
Comparison image of KEF KF92 and ELAC Debut 2.0 SUB3010 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF KF92 is approximately 1198.2cm2 / 185.7inch2 and base area of the ELAC Debut 2.0 SUB3010 is approximately 1359.7cm2 / 210.8inch2. The KF92 requires 12% less surface area than the Debut 2.0 SUB3010 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF KF92 weighs 20.05kg / 44.1lbs and the ELAC Debut 2.0 SUB3010 weighs 14.59kg / 32.1lbs. This makes the KF92 37% heavier than the Debut 2.0 SUB3010.
Here is a comparison of how KF92 and Debut 2.0 SUB3010's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF KF92?
Here are the items that are included inside the box of KF92:
Powered subwoofer6.5-feet AC power cordSpeaker-level input blockUser ManualImportant Safety InformationWarranty Information
What's in the Box of ELAC Debut 2.0 SUB3010?
Here are the items that come with the Debut 2.0 SUB3010:
Powered subwoofer9-feet AC power cord4 Spikes4 Hex-nutsOperating Instructions
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
28 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
150k Hz
|
Generates higher frequency |
 Height |
353mm
vs
374mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1198cm2 (331x362mm)
vs
1359cm2 (355x383mm)
|
Takes less floor space |
| Woofer Size |
10 inches
vs
9 inches
|
Larger woofer |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Price per pair* |
650USD
vs
2000USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
KEF KF92 |
ELAC Debut 2.0 SUB3010 |
| Brand |
KEF |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
200 watts |
| Frequency Response |
11-200 Hz |
28-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
9" |
10" |
| Woofer Composition |
Hybrid aluminum |
Doped Paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
353.0mm (13.9") |
374.0mm (14.7") |
| Width |
331.0mm (13") |
355.0mm (14") |
| Depth |
362.0mm (14.3") |
383.0mm (15.1") |
| Weight |
20.05kg (44.1lbs) |
14.59kg (32.1lbs) |
| Enclosure |
Acoustic Suspension |
Passive radiator |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |