In this review, we will be comparing Stage 220P and RP-1000SW, two Powered Subwoofer speakers from JBL and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of JBL Stage 220P and Klipsch RP-1000SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the JBL Stage 220P and Klipsch RP-1000SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.JBL Stage 220P and Klipsch RP-1000SW have a totally different setup: the JBL Stage 220P features x 12-inch drivers whereas the RP-1000SW features 1 x 10-inch drivers.
Frequency Response
Stage 220P has a frequency range of 29-150 Hz whereas RP-1000SW has a frequency range of 19-131 Hz. With a minimum frequency of 19Hz, the RP-1000SW can go significantly deeper on the low side and provide stronger bass compared to the Stage 220P's min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The JBL Stage 220P has a Passive Radiator type cabinet. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs. On the other hand the Klipsch RP-1000SW have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Stage 220P's and Klipsch RP-1000SW's external dimensions. JBL Stage 220P has external dimensions of 418.0 x 405.0 x 445.0mm ( 16-7/16inch x 15-15/16inch x 17-1/2inch ) whereas Klipsch RP-1000SW has external dimensions of 423.0 x 381.0 x 635.0mm ( 16-5/8inch x 15inch x 25inch ) .
JBL Stage 220P is 5mm shorter and 190mm less deeper than Klipsch RP-1000SW but it is also 24mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the JBL Stage 220P is approximately 1802.3cm2 / 279.4inch2 and base area of the Klipsch RP-1000SW is approximately 2419.4cm2 / 375.0inch2. The Stage 220P requires 26% less surface area than the RP-1000SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The JBL Stage 220P weighs 18.73kg / 41.2lbs and the Klipsch RP-1000SW weighs 25.77kg / 56.7lbs. This makes the RP-1000SW 38% heavier than the Stage 220P.
Here is a comparison of how Stage 220P and RP-1000SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 High Frequency Response |
150k Hz
vs
131k Hz
|
Generates higher frequency |
 Height |
418mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1802cm2
vs
2419cm2
|
Takes less floor space |
 Price per pair* |
599USD
vs
749USD
|
costs less (*prices may change depending on the seller, location and time) |
| Low Frequency Response |
19 Hz
vs
29 Hz
|
Generates deeper bass |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
JBL Stage 220P |
Klipsch Reference Premiere RP-1000SW |
| Brand |
JBL |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
250 watts |
300 watts |
| Frequency Response |
29-150 Hz |
19-131 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
250-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
500-watt RMS |
600-watt RMS |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Polycellulose |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
418.0mm (16.5") |
423.0mm (16.7") |
| Width |
405.0mm (15.9") |
381.0mm (15") |
| Depth |
445.0mm (17.5") |
635.0mm (25") |
| Weight |
18.73kg (41.2lbs) |
25.77kg (56.7lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF with Vinyl |
| Available Colors |
Espresso,Latte |
Ebony |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 year |
5 years |
| Labor Warranty |
1 year |
5 years |