In this review, we will be comparing Elysian 4 and RP-6000F, two Passive Floor-standing speakers from Wharfedale and Klipsch. Let's have a brief look at the main features
of Wharfedale Elysian 4 and Klipsch RP-6000F first before getting into our more
detailed comparison.
What size room are the Wharfedale Elysian 4 and Klipsch RP-6000F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale Elysian 4 and Klipsch RP-6000F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Elysian 4 is a 3-way design whereas the RP-6000F is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Wharfedale Elysian 4 |
Klipsch RP-6000F |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
27x90mm-inch
|
1-inch
|
Midrange
|
1 x 6-inch |
- |
Woofer
|
2 x 8.5-inch
|
2 x 6.5-inch
|
Elysian 4 features a 27x90mm" AMT (Ribbon) Tweeter , a 6" Midrange and 2 x 8.5" Coated Fiberglass Woofer with a Crossover frequency at 340Hz and 3100Hz. On the other hand, the RP-6000F features a 1" Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer .
Frequency Response
Elysian 4 has a frequency range of 30-22k Hz whereas RP-6000F has a frequency range of 34-25k Hz. With a minimum frequency of 30Hz, the Elysian 4 can go slightly deeper then the RP-6000F's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Elysian 4 is a 4 ohms speaker compared to the RP-6000F which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Elysian 4 can provide this impedance level.
These two speakers also have different sensitivity levels. Elysian 4 sensitivity is rated at 92 dB and the RP-6000F's is rated at 97 dB. This 5 dB difference makes the Klipsch RP-6000F a more sensitive speaker compared to Wharfedale Elysian 4, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Elysian 4 can handle a max power of 250 watts RMS from the amp the whereas RP-6000F has a max power handling value of 125 watts RMS, 125 watts less than the Elysian 4.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Elysian 4 and RP-6000F features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Elysian 4 has a bottom firing port whereas RP-6000F has a rear firing ports. Wharfedale Elysian 4's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-6000F with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Elysian 4's and Klipsch RP-6000F's external dimensions. Wharfedale Elysian 4 has external dimensions of 1188.0 x 402.0 x 462.0mm ( 46-3/4 x 15-13/16 x 18-3/16inch) whereas Klipsch RP-6000F has external dimensions of 1010.0 x 237.0 x 432.0mm ( 39-3/4 x 9-5/16 x 17inch) .
Wharfedale Elysian 4 is clearly the larger of the two speakers. Its body is 165mm wider, 178mm taller and 30mm deeper than Klipsch RP-6000F.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Elysian 4 is approximately 1857.2cm2 / 287.9inch2 and base area of the Klipsch RP-6000F is approximately 1023.8cm2 / 158.7inch2. The Elysian 4 requires 81% more surface area than the RP-6000F which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale Elysian 4 weighs 49.60kg / 109.1lbs and the Klipsch RP-6000F weighs 22.27kg / 49lbs. This makes the Elysian 4 123% heavier than the RP-6000F.
Here is a comparison of how Elysian 4 and RP-6000F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Wharfedale Elysian 4?
Here are the items that are included inside the box of Elysian 4:
Floorstanding loudspeakerGrille2 Terminal-jumpers (pre-installed)4 Spike feetUser Manual
What's in the Box of Klipsch RP-6000F?
Here are the items that come with the RP-6000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
Max Input Power |
250 watts
vs
125 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Woofer Size |
8.5 inches
vs
6.5 inches
|
Larger woofer |
Low Frequency Response |
30 Hz
vs
34 Hz
|
Generates deeper bass |
Sensitivity |
97 dB
vs
92 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
High Frequency Response |
25k Hz
vs
22k Hz
|
Generates higher frequency |
Height |
1010mm
vs
1188mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1023cm2 (237x432mm)
vs
1857cm2 (402x462mm)
|
Takes less floor space |
Price per pair* |
1378USD
vs
9996USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Wharfedale Elysian 4 |
Klipsch Reference Premiere RP-6000F |
Brand |
Wharfedale |
Klipsch |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
15-250 watts |
up to 125 watts |
Sensitivity |
92 dB |
97 dB |
Impedance |
4 ohms |
8 ohms |
Frequency Response |
30-22k Hz |
34-25k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
8.5" |
6.5" |
Woofer Composition |
Coated Fiberglass |
Cerametallic |
Woofer Surround Material |
Foamed Rubber |
Rubber |
Tweeter Size |
27x90mm" |
1" |
Tweeter Type |
AMT (Ribbon) |
Tractrix Horn |
Aimable Tweeter |
No |
No |
Midrange Driver |
6" |
No |
Crossover Frequency |
340Hz and 3100Hz |
n/a |
Firing Direction |
bottom |
rear |
Physical Specs |
|
|
Height |
1188.0mm (46.8") |
1010.0mm (39.8") |
Width |
402.0mm (15.8") |
237.0mm (9.3") |
Depth |
462.0mm (18.2") |
432.0mm (17") |
Weight |
49.60kg (109.1lbs) |
22.27kg (49lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Lacquer |
MDF/Wood-grain vinyl |
Available Colors |
Piano Black, Piano Walnut,White |
Walnut, Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |