In this review, we will be comparing Elysian 2 and R-51M, two Passive Bookshelf speakers from Wharfedale and Klipsch. Let's have a brief look at the main features
of Wharfedale Elysian 2 and Klipsch R-51M first before getting into our more
detailed comparison.
What size room are the Wharfedale Elysian 2 and Klipsch R-51M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale Elysian 2 and Klipsch R-51M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Elysian 2 is a 3-way design whereas the R-51M is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Wharfedale Elysian 2 |
Klipsch R-51M |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
27x90mm-inch
|
1-inch
|
Midrange
|
1 x 6-inch |
- |
Woofer
|
1 x 8.5-inch
|
1 x 5.25-inch
|
Elysian 2 features a 27x90mm" AMT (Ribbon) Tweeter , a 6" Midrange and 1 x 8.5" Coated Fiberglass Woofer with a Crossover frequency at 360Hz and 2900Hz. On the other hand, the R-51M features a 1" Tractrix Horn Tweeter and 1 x 5.25" Copper-spun IMG Woofer with a Crossover frequency at 1660Hz.
Frequency Response
Elysian 2 has a frequency range of 35-22k Hz whereas R-51M has a frequency range of 62-21k Hz. With a minimum frequency of 35Hz, the Elysian 2 can go significantly deeper on the low side and provide stronger bass compared to the R-51M's min frequency of 62Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Elysian 2 is a 4 ohms speaker compared to the R-51M which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Elysian 2 can provide this impedance level.
These two speakers also have different sensitivity levels. Elysian 2 sensitivity is rated at 89 dB and the R-51M's is rated at 93 dB. This 4 dB difference makes the Klipsch R-51M a more sensitive speaker compared to Wharfedale Elysian 2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Elysian 2 can handle a max power of 250 watts RMS from the amp the whereas R-51M has a max power handling value of 85 watts RMS, 165 watts less than the Elysian 2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Elysian 2 features Post posts which make bi-amping or bi-wiring possible. R-51M has a Single Gold Plated Binding Posts - 5-way which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Elysian 2 has a bottom firing port whereas R-51M has a rear firing ports. Wharfedale Elysian 2's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch R-51M with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Elysian 2's and Klipsch R-51M's external dimensions. Wharfedale Elysian 2 has external dimensions of 700.0 x 334.0 x 462.0mm ( 27.5 x 13.1 x 18.1inch) whereas Klipsch R-51M has external dimensions of 338.0 x 178.0 x 215.0mm ( 13.3 x 7.0 x 8.4inch) .
Wharfedale Elysian 2 is clearly the larger of the two speakers. Its body is 156mm wider, 362mm taller and 247mm deeper than Klipsch R-51M.
Below you can see the front view size comparison of Wharfedale Elysian 2 and Klipsch R-51M in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Elysian 2 is approximately 1543.1cm2 / 239.2inch2 and base area of the Klipsch R-51M is approximately 382.7cm2 / 59.3inch2. The Elysian 2 requires 303% more surface area than the R-51M which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale Elysian 2 weighs 30.50kg / 67.1lbs and the Klipsch R-51M weighs 5.00kg / 11lbs. This makes the Elysian 2 510% heavier than the R-51M.
Here is a comparison of how Elysian 2 and R-51M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale Elysian 2?
Here are the items that are included inside the box of Elysian 2:
Stand-mount loudspeaker Grille 2 Terminal-jumpers (pre-installed) User Manual
What's in the Box of Klipsch R-51M?
Here are the items that come with the R-51M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet Quick Setup Guide Important Safety Instructions Warranty Information
Max Input Power |
250 watts
vs
85 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Woofer Size |
8.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
35 Hz
vs
62 Hz
|
Generates deeper bass |
High Frequency Response |
22k Hz
vs
21k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Sensitivity |
93 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Height |
338mm
vs
700mm
|
Easier to fit in smaller spaces |
Base Surface Area |
382cm2 (178x215mm)
vs
1543cm2 (334x462mm)
|
Takes less floor space |
Price per pair* |
359USD
vs
6996USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Wharfedale Elysian 2 |
Klipsch Reference R-51M |
Brand |
Wharfedale |
Klipsch |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
25-250 watts |
Up to 85 watts |
Sensitivity |
89 dB |
93 dB |
Impedance |
4 ohms |
8 ohms |
Frequency Response |
35-22k Hz |
62-21k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
8.5" |
5.25" |
Woofer Composition |
Coated Fiberglass |
Copper-spun IMG |
Woofer Surround Material |
Foamed Rubber |
Rubber |
Tweeter Size |
27x90mm" |
1" |
Tweeter Type |
AMT (Ribbon) |
Tractrix Horn |
Aimable Tweeter |
No |
No |
Midrange Driver |
6" |
No |
Crossover Frequency |
360Hz and 2900Hz |
1660Hz |
Firing Direction |
bottom |
rear |
Physical Specs |
|
|
Height |
700.0mm (27.6") |
338.0mm (13.3") |
Width |
334.0mm (13.1") |
178.0mm (7") |
Depth |
462.0mm (18.2") |
215.0mm (8.5") |
Weight |
30.50kg (67.1lbs) |
5.00kg (11lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-veneer |
MDF/Wood-grain vinyl |
Available Colors |
Piano Black, Piano Walnut,White |
Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
16-22" |
24-28" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 years |
5 Years |
Labor Warranty |
5 years |
5 Years |