In this review, we will be comparing Diamond 220 and Reva 1, two Passive Bookshelf speakers by Wharfedale Let's have a brief look at the main features
of Wharfedale 220 and Wharfedale Reva 1 first before getting into our more
detailed comparison.
What size room are the Wharfedale 220 and Wharfedale Reva 1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale 220 and Wharfedale Reva 1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Diamond 220 and Reva 1 are 2-way speakers.
Driver |
Wharfedale 220 |
Wharfedale Reva 1 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5-inch
|
1 x 4.5-inch
|
Diamond 220 features a 1" Dome Tweeter and 1 x 5" Woven Kevlar Woofer with a Crossover frequency at 2200Hz. On the other hand, the Reva 1 features a 1" woven textile Dome Tweeter and 1 x 4.5" Woven Glass Fiber Woofer .
Frequency Response
Diamond 220 has a frequency range of 56-20k Hz whereas Reva 1 has a frequency range of 52-20k Hz. With a minimum frequency of 52Hz, the Reva 1 can go slightly deeper then the Diamond 220's min frequency of 56Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 220 and Reva 1 have the same Impedance of 8 ohms and their sensitivity is also same at 86 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Diamond 220 can handle a max power of 100 watts RMS from the amp the whereas Reva 1 has a max power handling value of 60 watts RMS, 40 watts less than the Diamond 220.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Diamond 220 and Reva 1 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Both Diamond 220 and Reva 1 have bottom firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale 220's and Wharfedale Reva 1's external dimensions. Wharfedale 220 has external dimensions of 315.0 x 174.0 x 255.0mm ( 12.4 x 6.8 x 10.0inch) whereas Wharfedale Reva 1 has external dimensions of 318.0 x 174.0 x 285.0mm ( 12-1/2 x 6-13/16 x 11-3/16inch) .
Below you can see the front view size comparison of Wharfedale 220 and Wharfedale Reva 1 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale 220 is approximately 443.7cm2 / 68.8inch2 and base area of the Wharfedale Reva 1 is approximately 495.9cm2 / 76.9inch2. The Diamond 220 requires 11% less surface area than the Reva 1 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale 220 weighs 5.32kg / 11.7lbs and the Wharfedale Reva 1 weighs 5.64kg / 12.4lbs. This makes the Reva 1 6% heavier than the Diamond 220.
Here is a comparison of how Diamond 220 and Reva 1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale 220?
Here are the items that are included inside the box of Diamond 220:
2 Bookshelf loudspeakers 2 Grilles (pre-installed) 8 Self-adhesive rubber feet User's Manual Installation Guide
What's in the Box of Wharfedale Reva 1?
Here are the items that come with the Reva 1:
2 Bookshelf loudspeakers2 Grilles (pre-installed)8 Self-adhesive rubber feet4 Jumper bars (pre-installed)Pair of white glovesUser-feets Manual
Max Input Power |
100 watts
vs
60 watts
|
Handle more power from your amplifier |
Woofer Size |
5 inches
vs
4.5 inches
|
Larger woofer |
Height |
315mm
vs
318mm
|
Easier to fit in smaller spaces |
Base Surface Area |
443cm2 (174x255mm)
vs
495cm2 (174x285mm)
|
Takes less floor space |
Low Frequency Response |
52 Hz
vs
56 Hz
|
Generates deeper bass |
General |
Wharfedale Diamond 220 |
Wharfedale Reva 1 |
Brand |
Wharfedale |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
25-100 watts |
20-60 watts |
Sensitivity |
86 dB |
86 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
4.1 ohms |
n/a |
Frequency Response |
56-20k Hz |
52-20k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5" |
4.5" |
Woofer Composition |
Woven Kevlar |
Woven Glass Fiber |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2200Hz |
n/a |
Firing Direction |
bottom |
bottom |
Physical Specs |
|
|
Height |
315.0mm (12.4") |
318.0mm (12.5") |
Width |
174.0mm (6.9") |
174.0mm (6.9") |
Depth |
255.0mm (10") |
285.0mm (11.2") |
Weight |
5.32kg (11.7lbs) |
5.64kg (12.4lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood veneer |
Wood composite laminate |
Available Colors |
Black, White, Walnut |
Walnut |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24" |
28-30" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |