In this review, we will be comparing Diamond 11.2 and M106, two Passive Bookshelf speakers from Wharfedale and Revel. Let's have a brief look at the main features
of Wharfedale 11.2 and Revel M106 first before getting into our more
detailed comparison.
What size room are the Wharfedale 11.2 and Revel M106 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale 11.2 and Revel M106 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Diamond 11.2 and M106 are 2-way speakers.
Driver |
Wharfedale 11.2 |
Revel M106 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Diamond 11.2 features a 1" Soft-Dome Tweeter and 1 x 6.5" Woven Kevlar Woofer . On the other hand, the M106 features a 1" aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2300Hz.
Frequency Response
Diamond 11.2 has a frequency range of 48-20k Hz whereas M106 has a frequency range of 59Hz- 20kHz. With a minimum frequency of 48Hz, the Diamond 11.2 can go significantly deeper on the low side and provide stronger bass compared to the M106's min frequency of 59Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 11.2 and M106 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Diamond 11.2 sensitivity is rated at 88 dB and the M106's is at 87 dB. This 1 dB difference makes the Wharfedale 11.2 a more sensitive speaker compared to Revel M106, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Diamond 11.2 can handle a max power of 150 watts RMS from the amp the whereas Diamond 11.2 has a max power handling value of 125 watts RMS , 25 watts less than the M106.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Diamond 11.2 features Binding post type posts and M106 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Diamond 11.2 has a bottom firing port whereas M106 has a rear firing ports. Wharfedale 11.2's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Revel M106 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale 11.2's and Revel M106's external dimensions. Wharfedale 11.2 has external dimensions of 356.0 x 223.0 x 321.0mm ( 14 x 8-3/4 x 12-5/8inch) whereas Revel M106 has external dimensions of 383.0 x 210.0 x 280.0mm ( 15-1/16 x 8-1/4 x 11inch) .
Revel M106 is 13mm narrower and 41mm less deeper than Wharfedale 11.2 but it is also 27mm taller.
Below you can see the front view size comparison of Wharfedale 11.2 and Revel M106 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale 11.2 is approximately 715.8cm2 / 110.9inch2 and base area of the Revel M106 is approximately 588.0cm2 / 91.1inch2. The Diamond 11.2 requires 22% more surface area than the M106 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale 11.2 weighs 9.00kg / 19.8lbs and the Revel M106 weighs 8.41kg / 18.5lbs. This makes the Diamond 11.2 7% heavier than the M106.
Here is a comparison of how Diamond 11.2 and M106's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale 11.2?
Here are the items that are included inside the box of Diamond 11.2:
2 Bookshelf loudspeakers2 Grilles (pre-installed)8 Self-adhesive rubber feetUser-feets ManualInstallation Guide
What's in the Box of Revel M106?
Here are the items that come with the M106:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual
Sensitivity |
88 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
48 Hz
vs
59 Hz
|
Generates deeper bass |
Height |
356mm
vs
383mm
|
Easier to fit in smaller spaces |
Max Input Power |
150 watts
vs
125 watts
|
Handle more power from your amplifier |
Base Surface Area |
588cm2 (210x280mm)
vs
715cm2 (223x321mm)
|
Takes less floor space |
General |
Wharfedale Diamond 11.2 |
Revel Performa3 M106 |
Brand |
Wharfedale |
Revel |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
25-125 watts |
50-150 watts |
Sensitivity |
88 dB |
87 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
48-20k Hz |
59Hz- 20kHz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Woven Kevlar |
Aluminum |
Woofer Surround Material |
Foam |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Soft-Dome |
Hard-Dome with Acoustic Lens Waveguide |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
2300Hz |
Firing Direction |
bottom |
rear |
Physical Specs |
|
|
Height |
356.0mm (14") |
383.0mm (15.1") |
Width |
223.0mm (8.8") |
210.0mm (8.3") |
Depth |
321.0mm (12.6") |
280.0mm (11") |
Weight |
9.00kg (19.8lbs) |
8.41kg (18.5lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood veneer |
Wood/Lacquer |
Available Colors |
Rosewood, Black, White, Walnut |
Gloss Walnut,Piano Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-28" |
24-25" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |