In this review, we will be comparing Lumina I and LINTON Heritage, two Passive Bookshelf speakers from Sonus Faber and Wharfedale. Let's have a brief look at the main features
of Sonus Lumina I and Wharfedale LINTON first before getting into our more
detailed comparison.
What size room are the Sonus Lumina I and Wharfedale LINTON speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Sonus Lumina I and Wharfedale LINTON compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Lumina I is a 2-way design whereas the LINTON Heritage is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Sonus Lumina I |
Wharfedale LINTON |
Driver Setup
|
2-way
|
3-way
|
Tweeter
|
1.15-inch
|
1-inch
|
Midrange
|
- |
1 x 5-inch |
Woofer
|
1 x 4.75-inch
|
1 x 8-inch
|
Lumina I features a 1.15" high definition DAD Tweeter and 1 x 4.75" paper cone Woofer with a Crossover frequency at 2000Hz. On the other hand, the LINTON Heritage features a 1" woven textile Soft-dome Tweeter , a 5" Midrange and 1 x 8" Woven Kevlar Woofer with a Crossover frequency at 630Hz and 2400Hz.
Frequency Response
Lumina I has a frequency range of 65-24k Hz whereas LINTON Heritage has a frequency range of 40-20k Hz. With a minimum frequency of 40Hz, the LINTON Heritage can go significantly deeper on the low side and provide stronger bass compared to the Lumina I's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Lumina I is a 4 ohms speaker compared to the LINTON Heritage which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Lumina I can provide this impedance level.
These two speakers also have different sensitivity levels. Lumina I sensitivity is rated at 88 dB and the LINTON Heritage's is rated at 90 dB. This 6 dB difference makes the Wharfedale LINTON a more sensitive speaker compared to Sonus Lumina I, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Lumina I can handle a max power of 200 watts RMS from the amp the whereas Lumina I has a max power handling value of 100 watts RMS , 100 watts less than the LINTON Heritage.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Lumina I features Binding post posts which make bi-amping or bi-wiring possible. LINTON Heritage has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Lumina I has a front firing port whereas LINTON Heritage has a rear firing ports. Sonus Lumina I's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Wharfedale LINTON with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Lumina I's and Wharfedale LINTON's external dimensions. Sonus Lumina I has external dimensions of 280.0 x 148.0 x 213.0mm ( 11 x 5.8 x 8.4inch) whereas Wharfedale LINTON has external dimensions of 565.0 x 300.0 x 330.0mm ( 22.2 x 11.8 x 12.9inch) .
Wharfedale LINTON is clearly the larger of the two speakers. Its body is 152mm wider, 285mm taller and 117mm deeper than Sonus Lumina I.
Below you can see the front view size comparison of Sonus Lumina I and Wharfedale LINTON in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Lumina I is approximately 315.2cm2 / 48.9inch2 and base area of the Wharfedale LINTON is approximately 990.0cm2 / 153.5inch2. The Lumina I requires 68% less surface area than the LINTON Heritage which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Sonus Lumina I weighs 4.40kg / 9.7lbs and the Wharfedale LINTON weighs 18.40kg / 40.5lbs. This makes the LINTON Heritage 318% heavier than the Lumina I.
Here is a comparison of how Lumina I and LINTON Heritage's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Sonus Lumina I?
Here are the items that are included inside the box of Lumina I:
2 Bookshelf loudspeakers1 Manual 2 Jumpers2 Grilles 2 Fabric dust guards
What's in the Box of Wharfedale LINTON?
Here are the items that come with the LINTON Heritage:
Bookshelf loudspeaker Grille (pre-installed) 4 Self-adhesive rubber feet Pair of white gloves User's Manual
High Frequency Response |
24k Hz
vs
20k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Height |
280mm
vs
565mm
|
Easier to fit in smaller spaces |
Base Surface Area |
315cm2 (148x213mm)
vs
990cm2 (300x330mm)
|
Takes less floor space |
Price per pair* |
899USD
vs
1500USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
200 watts
vs
100 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
90 dB
vs
84 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
Woofer Size |
8 inches
vs
4.75 inches
|
Larger woofer |
Low Frequency Response |
40 Hz
vs
65 Hz
|
Generates deeper bass |
General |
Sonus Faber Lumina I |
Wharfedale LINTON Heritage |
Brand |
Sonus Faber |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
30-100 watts |
25-200 watts |
Sensitivity |
88 dB |
90 dB |
Impedance |
4 ohms |
6 ohms |
Impedance |
n/a |
3.5 ohms |
Frequency Response |
65-24k Hz |
40-20k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
4.75" |
8" |
Woofer Composition |
paper cone |
Woven Kevlar |
Woofer Surround Material |
n/a |
Rubber |
Tweeter Size |
1.15" |
1" |
Tweeter Type |
high definition DAD |
Soft-dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
5" |
Crossover Frequency |
2000Hz |
630Hz and 2400Hz |
Firing Direction |
front |
rear |
Physical Specs |
|
|
Height |
280.0mm (11") |
565.0mm (22.2") |
Width |
148.0mm (5.8") |
300.0mm (11.8") |
Depth |
213.0mm (8.4") |
330.0mm (13") |
Weight |
4.40kg (9.7lbs) |
18.40kg (40.5lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
real multilayer wood |
MDF/Wood Veneer |
Available Colors |
Black, Wenge, Walnut |
Walnut, Red Mahogany, Black |
Mounting Bracket |
|
No |
Recommended Stand Height |
n/a |
18-22" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
|
5 Years |
Labor Warranty |
|
5 Years |