In this review, we will be comparing M126Be and Motion 35XTi, two Passive Bookshelf speakers from Revel and MartinLogan. Let's have a brief look at the main features
of Revel M126Be and MartinLogan 35XTi first before getting into our more
detailed comparison.
What size room are the Revel M126Be and MartinLogan 35XTi speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Revel M126Be and MartinLogan 35XTi compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both M126Be and Motion 35XTi are 2-way speakers.
Driver |
Revel M126Be |
MartinLogan 35XTi |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1.25 x 2.4-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
M126Be features a 1" beryllium Hard-Dome Tweeter and 1 x 6.5" DCC Aluminum Woofer . On the other hand, the Motion 35XTi features a 1.25 x 2.4" Folded Motion XT Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2200Hz.
Frequency Response
M126Be has a frequency range of 54-44k Hz whereas Motion 35XTi has a frequency range of 50-25k Hz. With a minimum frequency of 50Hz, the Motion 35XTi can go slightly deeper then the M126Be's min frequency of 54Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
M126Be is a 8 ohms speaker compared to the Motion 35XTi which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Motion 35XTi can provide this impedance level.
These two speakers also have different sensitivity levels. M126Be sensitivity is rated at 86 dB and the Motion 35XTi's is rated at 92 dB. This 6 dB difference makes the MartinLogan 35XTi a more sensitive speaker compared to Revel M126Be, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
M126Be can handle a max power of 250 watts RMS from the amp the whereas M126Be has a max power handling value of 150 watts RMS , 100 watts less than the Motion 35XTi.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Motion 35XTi features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. M126Be has a Binding post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both M126Be and Motion 35XTi have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel M126Be's and MartinLogan 35XTi's external dimensions. Revel M126Be has external dimensions of 388.0 x 212.0 x 262.0mm ( 15-1/4 x 8-5/16 x 10-5/16inch) whereas MartinLogan 35XTi has external dimensions of 343.0 x 192.0 x 300.0mm ( 13.5 x 7.5 x 11.8inch) .
MartinLogan 35XTi is 20mm narrower and 45mm shorter than Revel M126Be but it is also 38mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel M126Be is approximately 555.4cm2 / 86.1inch2 and base area of the MartinLogan 35XTi is approximately 576.0cm2 / 89.3inch2. The M126Be requires 4% less surface area than the Motion 35XTi which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel M126Be weighs 10.00kg / 22lbs and the MartinLogan 35XTi weighs 8.40kg / 18.5lbs. This makes the M126Be 19% heavier than the Motion 35XTi.
Here is a comparison of how M126Be and Motion 35XTi's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Revel M126Be?
Here are the items that are included inside the box of M126Be:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual
What's in the Box of MartinLogan 35XTi?
Here are the items that come with the Motion 35XTi:
Bookshelf loudspeaker Grille 4 Rubber feet 2 Jumper-straps (pre-installed) Users Manual Warranty/Registration Information
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
High Frequency Response |
44k Hz
vs
25k Hz
|
Generates higher frequency |
Base Surface Area |
555cm2 (212x262mm)
vs
576cm2 (192x300mm)
|
Takes less floor space |
Max Input Power |
250 watts
vs
150 watts
|
Handle more power from your amplifier |
Sensitivity |
92 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
50 Hz
vs
54 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
343mm
vs
388mm
|
Easier to fit in smaller spaces |
Price per pair* |
1500USD
vs
4400USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Revel PerformaBe M126Be |
MartinLogan Motion 35XTi |
Brand |
Revel |
MartinLogan |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
50-150 watts |
20-250 watts |
Sensitivity |
86 dB |
92 dB |
Impedance |
8 ohms |
4 ohms |
Frequency Response |
54-44k Hz |
50-25k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
DCC Aluminum |
Aluminum |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1.25 x 2.4" |
Tweeter Type |
Hard-Dome |
Folded Motion XT |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
2200Hz |
Firing Direction |
rear |
rear |
Suggested Break-in Period |
n/a |
Allow 72 hours of break-in at 90 dB |
Physical Specs |
|
|
Height |
388.0mm (15.3") |
343.0mm (13.5") |
Width |
212.0mm (8.3") |
192.0mm (7.6") |
Depth |
262.0mm (10.3") |
300.0mm (11.8") |
Weight |
10.00kg (22lbs) |
8.40kg (18.5lbs) |
Enclosure |
Bass reflex |
Bass Reflex |
Finish |
Wood/Lacquer |
MDF/Lacquer |
Available Colors |
Walnut,Black,White,Silver |
Gloss Black, Matt White, Red Walnut |
Mounting Bracket |
No |
No |
Recommended Stand Height |
22-26" |
24-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |