In this review, we will be comparing M126Be and Chorus 706, two Passive Bookshelf speakers from Revel and Focal. Let's have a brief look at the main features
of Revel M126Be and Focal Chorus 706 first before getting into our more
detailed comparison.
What size room are the Revel M126Be and Focal Chorus 706 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Revel M126Be and Focal Chorus 706 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both M126Be and Chorus 706 are 2-way speakers.
Driver |
Revel M126Be |
Focal Chorus 706 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
M126Be features a 1" beryllium Hard-Dome Tweeter and 1 x 6.5" DCC Aluminum Woofer . On the other hand, the Chorus 706 features a 1" TNV2 AI/Mg inverted dome Tweeter and 1 x 6.5" Polyglass Woofer with a Crossover frequency at 3000Hz.
Frequency Response
M126Be has a frequency range of 54-44k Hz whereas Chorus 706 has a frequency range of 55-28k Hz. With a minimum frequency of 54Hz, the M126Be can go slightly deeper then the Chorus 706's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
M126Be and Chorus 706 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. M126Be sensitivity is rated at 86 dB and the Chorus 706's is at 90 dB. This 4 dB difference makes the Focal Chorus 706 a more sensitive speaker compared to Revel M126Be, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
M126Be can handle a max power of 150 watts RMS from the amp the whereas Chorus 706 has a max power handling value of 120 watts RMS, 30 watts less than the M126Be.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
M126Be features Binding post type posts and Chorus 706 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
M126Be has a rear firing port whereas Chorus 706 has a front firing ports. Focal Chorus 706's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Revel M126Be with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel M126Be's and Focal Chorus 706's external dimensions. Revel M126Be has external dimensions of 388.0 x 212.0 x 262.0mm ( 15-1/4 x 8-5/16 x 10-5/16inch) whereas Focal Chorus 706 has external dimensions of 390.0 x 220.0 x 263.0mm ( 15.4 x 8.7 x 10.4inch) .
Focal Chorus 706 is clearly the larger of the two speakers. Its body is 8mm wider, 2mm taller and 1mm deeper than Revel M126Be.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel M126Be is approximately 555.4cm2 / 86.1inch2 and base area of the Focal Chorus 706 is approximately 578.6cm2 / 89.7inch2. The M126Be requires 4% less surface area than the Chorus 706 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel M126Be weighs 10.00kg / 22lbs and the Focal Chorus 706 weighs 8.20kg / 18lbs. This makes the M126Be 22% heavier than the Chorus 706.
Here is a comparison of how M126Be and Chorus 706's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Revel M126Be?
Here are the items that are included inside the box of M126Be:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual
What's in the Box of Focal Chorus 706?
Here are the items that come with the Chorus 706:
2 Bookshelf loudspeakers 2 Cloth grilles (attached) User manual
Max Input Power |
150 watts
vs
120 watts
|
Handle more power from your amplifier |
Low Frequency Response |
54 Hz
vs
55 Hz
|
Generates deeper bass |
High Frequency Response |
44k Hz
vs
28k Hz
|
Generates higher frequency |
Height |
388mm
vs
390mm
|
Easier to fit in smaller spaces |
Base Surface Area |
555cm2 (212x262mm)
vs
578cm2 (220x263mm)
|
Takes less floor space |
Sensitivity |
90 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
General |
Revel PerformaBe M126Be |
Focal Chorus 706 |
Brand |
Revel |
Focal |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
50-150 watts |
25 - 120 watts |
Sensitivity |
86 dB |
90 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
3.6 ohms |
Frequency Response |
54-44k Hz |
55-28k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
DCC Aluminum |
Polyglass |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Hard-Dome |
inverted dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
3000Hz |
Firing Direction |
rear |
front |
Physical Specs |
|
|
Height |
388.0mm (15.3") |
390.0mm (15.4") |
Width |
212.0mm (8.3") |
220.0mm (8.7") |
Depth |
262.0mm (10.3") |
263.0mm (10.4") |
Weight |
10.00kg (22lbs) |
8.20kg (18lbs) |
Enclosure |
Bass reflex |
Bass Reflex |
Finish |
Wood/Lacquer |
Lacquer/Leatherette |
Available Colors |
Walnut,Black,White,Silver |
Rosewood, Walnut, Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
22-26" |
24-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 |
Labor Warranty |
5 Years |
5 |