In this review, we will be comparing M106 and A130, two Passive Bookshelf speakers from Revel and JBL. Let's have a brief look at the main features
of Revel M106 and JBL A130 first before getting into our more
detailed comparison.
What size room are the Revel M106 and JBL A130 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Revel M106 and JBL A130 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both M106 and A130 are 2-way speakers.
Driver |
Revel M106 |
JBL A130 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
M106 features a 1" aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2300Hz. On the other hand, the A130 features a 1" aluminum Hard-Dome Tweeter and 1 x 5.25" Polycellulose Woofer .
Frequency Response
M106 has a frequency range of 59Hz- 20kHz whereas A130 has a frequency range of 55-40k Hz. With a minimum frequency of 55Hz, the A130 can go slightly deeper then the M106's min frequency of 59Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
M106 is a 8 ohms speaker compared to the A130 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. M106 sensitivity is rated at 87 dB and the A130's is rated at 86 dB. This 1 dB difference makes the Revel M106 a more sensitive speaker compared to JBL A130, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
M106 can handle a max power of 150 watts RMS from the amp the whereas A130 has a max power handling value of 125 watts RMS, 25 watts less than the M106.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
M106 features 5-way post type posts and A130 has a 5-way post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both M106 and A130 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel M106's and JBL A130's external dimensions. Revel M106 has external dimensions of 383.0 x 210.0 x 280.0mm ( 15-1/16 x 8-1/4 x 11inch) whereas JBL A130 has external dimensions of 323.0 x 191.0 x 250.0mm ( 12-11/16 x 7-1/2 x 9-13/16inch) .
Revel M106 is clearly the larger of the two speakers. Its body is 19mm wider, 60mm taller and 30mm deeper than JBL A130.
Below you can see the front view size comparison of Revel M106 and JBL A130 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel M106 is approximately 588.0cm2 / 91.1inch2 and base area of the JBL A130 is approximately 477.5cm2 / 74.0inch2. The M106 requires 23% more surface area than the A130 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel M106 weighs 8.41kg / 18.5lbs and the JBL A130 weighs 5.46kg / 12lbs. This makes the M106 54% heavier than the A130.
Here is a comparison of how M106 and A130's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Revel M106?
Here are the items that are included inside the box of M106:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual
What's in the Box of JBL A130?
Here are the items that come with the A130:
2 Bookshelf loudspeakers2 Grilles8 Rubber feetOwners ManualWarranty Card
Max Input Power |
150 watts
vs
125 watts
|
Handle more power from your amplifier |
Sensitivity |
87 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
55 Hz
vs
59 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
20k Hz
|
Generates higher frequency |
Height |
323mm
vs
383mm
|
Easier to fit in smaller spaces |
Base Surface Area |
477cm2 (191x250mm)
vs
588cm2 (210x280mm)
|
Takes less floor space |
Price per pair* |
300USD
vs
2200USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Revel Performa3 M106 |
JBL Stage A130 |
Brand |
Revel |
JBL |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
50-150 watts |
20-125 watts |
Sensitivity |
87 dB |
86 dB |
Impedance |
8 ohms |
6 ohms |
Frequency Response |
59Hz- 20kHz |
55-40k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
5.25" |
Woofer Composition |
Aluminum |
Polycellulose |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Hard-Dome with Acoustic Lens Waveguide |
Hard-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2300Hz |
n/a |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
383.0mm (15.1") |
323.0mm (12.7") |
Width |
210.0mm (8.3") |
191.0mm (7.5") |
Depth |
280.0mm (11") |
250.0mm (9.8") |
Weight |
8.41kg (18.5lbs) |
5.46kg (12lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Wood/Lacquer |
MDF, Vinyl |
Available Colors |
Gloss Walnut,Piano Black |
Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-25" |
24-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |