In this review, we will be comparing TSi200 and S20, two Passive Bookshelf speakers by Polk Audio Let's have a brief look at the main features
of Polk TSi200 and Polk S20 first before getting into our more
detailed comparison.
What size room are the Polk TSi200 and Polk S20 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk TSi200 and Polk S20 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both TSi200 and S20 are 2-way speakers.
Driver |
Polk TSi200 |
Polk S20 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 5.25-inch
|
1 x 6.5-inch
|
TSi200 features a 1" Dome Tweeter and 2 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz. On the other hand, the S20 features a 1" Terylene Soft-Dome Tweeter and 1 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
TSi200 has a frequency range of 50-24k Hz whereas S20 has a frequency range of 39-40k Hz. With a minimum frequency of 39Hz, the S20 can go significantly deeper on the low side and provide stronger bass compared to the TSi200's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
TSi200 and S20 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. TSi200 sensitivity is rated at 89 dB and the S20's is at 88 dB. This 1 dB difference makes the Polk TSi200 a more sensitive speaker compared to Polk S20, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
TSi200 can handle a max power of 150 watts RMS from the amp the whereas S20 has a max power handling value of 125 watts RMS, 25 watts less than the TSi200.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
TSi200 features 5-way post type posts and S20 has a 5-way post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both TSi200 and S20 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk TSi200's and Polk S20's external dimensions. Polk TSi200 has external dimensions of 392.1 x 203.2 x 298.5mm ( 15.4 x 8.0 x 11.7inch) whereas Polk S20 has external dimensions of 376.0 x 216.0 x 350.0mm ( 14.8 x 8.5 x 13.7inch) .
Polk TSi200 is 12.8mm narrower and 51.5mm less deeper than Polk S20 but it is also 16.1mm taller.
Below you can see the front view size comparison of Polk TSi200 and Polk S20 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk TSi200 is approximately 606.6cm2 / 94.0inch2 and base area of the Polk S20 is approximately 756.0cm2 / 117.2inch2. The TSi200 requires 20% less surface area than the S20 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk TSi200 weighs 7.71kg / 17lbs and the Polk S20 weighs 7.73kg / 17lbs. This makes the S20 0% heavier than the TSi200.
Here is a comparison of how TSi200 and S20's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk TSi200?
Here are the items that are included inside the box of TSi200:
2 Black bookshelf speakers Detachable cloth grille (installed) 8 Self-adhesive rubber feet Owner's Manual Online registration sheet Polk Audio product brochure
What's in the Box of Polk S20?
Here are the items that come with the S20:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
Max Input Power |
150 watts
vs
125 watts
|
Handle more power from your amplifier |
Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Number of Woofers |
2
vs
1
|
More woofers |
Base Surface Area |
606cm2 (203x298mm)
vs
756cm2 (216x350mm)
|
Takes less floor space |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
39 Hz
vs
50 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
24k Hz
|
Generates higher frequency |
Height |
376mm
vs
392mm
|
Easier to fit in smaller spaces |
General |
Polk Audio TSi200 |
Polk Audio Signature S20 |
Brand |
Polk Audio |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-150 watts |
20-125 watts |
Sensitivity |
89 dB |
88 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
50-24k Hz |
39-40k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
1 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
Organic Fiber |
Mica-reinforced polypropylene |
Woofer Surround Material |
Butyl Rubber |
Butyl rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2500Hz |
2500Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
392.1mm (15.4") |
376.0mm (14.8") |
Width |
203.2mm (8") |
216.0mm (8.5") |
Depth |
298.5mm (11.8") |
350.0mm (13.8") |
Weight |
7.71kg (17lbs) |
7.73kg (17lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Wood-grain vinyl |
Meddite MDF |
Available Colors |
Black, Cherry |
Black, Walnut, Brown Walnut |
Mounting Bracket |
No |
No |
Recommended Stand Height |
16-26" |
24-28" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |