In this review, we will be comparing TSi200 and RP-500M, two Passive Bookshelf speakers from Polk Audio and Klipsch. Let's have a brief look at the main features
of Polk TSi200 and Klipsch RP-500M first before getting into our more
detailed comparison.
What size room are the Polk TSi200 and Klipsch RP-500M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk TSi200 and Klipsch RP-500M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both TSi200 and RP-500M are 2-way speakers.
Driver |
Polk TSi200 |
Klipsch RP-500M |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 5.25-inch
|
1 x 5.25-inch
|
TSi200 features a 1" Dome Tweeter and 2 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz. On the other hand, the RP-500M features a 1" Tractrix Horn Tweeter and 1 x 5.25" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
TSi200 has a frequency range of 50-24k Hz whereas RP-500M has a frequency range of 48-25k Hz. With a minimum frequency of 48Hz, the RP-500M can go slightly deeper then the TSi200's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
TSi200 and RP-500M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. TSi200 sensitivity is rated at 89 dB and the RP-500M's is at 93 dB. This 4 dB difference makes the Klipsch RP-500M a more sensitive speaker compared to Polk TSi200, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
TSi200 can handle a max power of 150 watts RMS from the amp the whereas RP-500M has a max power handling value of 75 watts RMS, 75 watts less than the TSi200.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
TSi200 features Single binding posts type posts and RP-500M has a Single binding posts type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both TSi200 and RP-500M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk TSi200's and Klipsch RP-500M's external dimensions. Polk TSi200 has external dimensions of 392.1 x 203.2 x 298.5mm ( 15.4 x 8.0 x 11.7inch) whereas Klipsch RP-500M has external dimensions of 343.0 x 173.0 x 241.0mm ( 13.5 x 6.8 x 9.4inch) .
Polk TSi200 is clearly the larger of the two speakers. Its body is 30.2mm wider, 49.1mm taller and 57.5mm deeper than Klipsch RP-500M.
Below you can see the front view size comparison of Polk TSi200 and Klipsch RP-500M in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk TSi200 is approximately 606.6cm2 / 94.0inch2 and base area of the Klipsch RP-500M is approximately 416.9cm2 / 64.6inch2. The TSi200 requires 46% more surface area than the RP-500M which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk TSi200 weighs 7.71kg / 17lbs and the Klipsch RP-500M weighs 5.40kg / 11.9lbs. This makes the TSi200 43% heavier than the RP-500M.
Here is a comparison of how TSi200 and RP-500M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk TSi200?
Here are the items that are included inside the box of TSi200:
2 Black bookshelf speakers Detachable cloth grille (installed) 8 Self-adhesive rubber feet Owner's Manual Online registration sheet Polk Audio product brochure
What's in the Box of Klipsch RP-500M?
Here are the items that come with the RP-500M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet User Manual Important Safety Instructions Warranty Information
Max Input Power |
150 watts
vs
75 watts
|
Handle more power from your amplifier |
Number of Woofers |
2
vs
1
|
More woofers |
Price per pair* |
279USD
vs
579USD
|
costs less (*prices may change depending on the seller, location and time) |
Sensitivity |
93 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
48 Hz
vs
50 Hz
|
Generates deeper bass |
High Frequency Response |
25k Hz
vs
24k Hz
|
Generates higher frequency |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Height |
343mm
vs
392mm
|
Easier to fit in smaller spaces |
Base Surface Area |
416cm2 (173x241mm)
vs
606cm2 (203x298mm)
|
Takes less floor space |
General |
Polk Audio TSi200 |
Klipsch Reference Premiere RP-500M |
Brand |
Polk Audio |
Klipsch |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-150 watts |
up to 75 watts |
Sensitivity |
89 dB |
93 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
50-24k Hz |
48-25k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
1 |
Woofer Size |
5.25" |
5.25" |
Woofer Composition |
Organic Fiber |
Cerametallic |
Woofer Surround Material |
Butyl Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Tractrix Horn |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2500Hz |
1500Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
392.1mm (15.4") |
343.0mm (13.5") |
Width |
203.2mm (8") |
173.0mm (6.8") |
Depth |
298.5mm (11.8") |
241.0mm (9.5") |
Weight |
7.71kg (17lbs) |
5.40kg (11.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Wood-grain vinyl |
MDF/Wood-grain vinyl |
Available Colors |
Black, Cherry |
Ebony, Walnut, Piano Black |
Mounting Bracket |
No |
Keyhole |
Recommended Stand Height |
16-26" |
28-30" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |