In this review, we will be comparing S15 and Diamond 220, two Passive Bookshelf speakers from Polk Audio and Wharfedale. Let's have a brief look at the main features
of Polk S15 and Wharfedale 220 first before getting into our more
detailed comparison.
What size room are the Polk S15 and Wharfedale 220 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk S15 and Wharfedale 220 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S15 and Diamond 220 are 2-way speakers.
Driver |
Polk S15 |
Wharfedale 220 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.25-inch
|
1 x 5-inch
|
S15 features a 1" Terylene Dome Tweeter and 1 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the Diamond 220 features a 1" Dome Tweeter and 1 x 5" Woven Kevlar Woofer with a Crossover frequency at 2200Hz.
Frequency Response
S15 has a frequency range of 50-40k Hz whereas Diamond 220 has a frequency range of 56-20k Hz. With a minimum frequency of 50Hz, the S15 can go significantly deeper on the low side and provide stronger bass compared to the Diamond 220's min frequency of 56Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S15 and Diamond 220 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S15 sensitivity is rated at 88 dB and the Diamond 220's is at 86 dB. This 2 dB difference makes the Polk S15 a more sensitive speaker compared to Wharfedale 220, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Diamond 220 features Post posts which make bi-amping or bi-wiring possible. S15 has a Pair of Binding Posts - Gold Plated which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
S15 has a rear firing port whereas Diamond 220 has a bottom firing ports. Wharfedale 220's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk S15 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk S15's and Wharfedale 220's external dimensions. Polk S15 has external dimensions of 304.8 x 190.0 x 260.4mm ( 12.0 x 7.4 x 10.2inch) whereas Wharfedale 220 has external dimensions of 315.0 x 174.0 x 255.0mm ( 12.4 x 6.8 x 10.0inch) .
Wharfedale 220 is 16mm narrower and 5.4mm less deeper than Polk S15 but it is also 10.2mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk S15 is approximately 494.8cm2 / 76.7inch2 and base area of the Wharfedale 220 is approximately 443.7cm2 / 68.8inch2. The S15 requires 12% more surface area than the Diamond 220 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk S15 weighs 5.90kg / 13lbs and the Wharfedale 220 weighs 5.32kg / 11.7lbs. This makes the S15 11% heavier than the Diamond 220.
Here is a comparison of how S15 and Diamond 220's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk S15?
Here are the items that are included inside the box of S15:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
What's in the Box of Wharfedale 220?
Here are the items that come with the Diamond 220:
2 Bookshelf loudspeakers 2 Grilles (pre-installed) 8 Self-adhesive rubber feet User's Manual Installation Guide
Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
50 Hz
vs
56 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
20k Hz
|
Generates higher frequency |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Height |
304mm
vs
315mm
|
Easier to fit in smaller spaces |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Base Surface Area |
443cm2 (174x255mm)
vs
494cm2 (190x260mm)
|
Takes less floor space |
Price per pair* |
249USD
vs
259USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Polk Audio Signature S15 |
Wharfedale Diamond 220 |
Brand |
Polk Audio |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-100 watts |
25-100 watts |
Sensitivity |
88 dB |
86 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
4.1 ohms |
Frequency Response |
50-40k Hz |
56-20k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
5" |
Woofer Composition |
Mica-reinforced polypropylene |
Woven Kevlar |
Woofer Surround Material |
Butyl rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2500Hz |
2200Hz |
Firing Direction |
rear |
bottom |
Physical Specs |
|
|
Height |
304.8mm (12") |
315.0mm (12.4") |
Width |
190.0mm (7.5") |
174.0mm (6.9") |
Depth |
260.4mm (10.3") |
255.0mm (10") |
Weight |
5.90kg (13lbs) |
5.32kg (11.7lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Meddite MDF |
MDF/Wood veneer |
Available Colors |
Black, Walnut, Brown Walnut |
Black, White, Walnut |
Mounting Bracket |
Keyhole |
No |
Recommended Stand Height |
24-30" |
24" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |