In this review, we will be comparing RTi A3 and Motion 15, two Passive Bookshelf speakers from Polk Audio and MartinLogan. Let's have a brief look at the main features
of Polk RTi A3 and MartinLogan 15 first before getting into our more
detailed comparison.
What size room are the Polk RTi A3 and MartinLogan 15 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk RTi A3 and MartinLogan 15 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RTi A3 and Motion 15 are 2-way speakers.
Driver |
Polk RTi A3 |
MartinLogan 15 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1.0 x 1.4-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
RTi A3 features a 1" silk polymer composite Dome Tweeter and 1 x 6.5" Polymer composite Woofer with a Crossover frequency at 2800Hz. On the other hand, the Motion 15 features a 1.0 x 1.4" Folded Motion Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2700Hz.
Frequency Response
RTi A3 has a frequency range of 50-26k Hz whereas Motion 15 has a frequency range of 60-25k Hz. With a minimum frequency of 50Hz, the RTi A3 can go significantly deeper on the low side and provide stronger bass compared to the Motion 15's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RTi A3 is a 8 ohms speaker compared to the Motion 15 which has a nominal impedance of 5 ohms.
These two speakers also have different sensitivity levels. RTi A3 sensitivity is rated at 89 dB and the Motion 15's is rated at 92 dB. This 3 dB difference makes the MartinLogan 15 a more sensitive speaker compared to Polk RTi A3, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RTi A3 can handle a max power of 200 watts RMS from the amp the whereas RTi A3 has a max power handling value of 150 watts RMS , 50 watts less than the Motion 15.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RTi A3 features Pair of Dual 5-way Binding Posts - Gold-Plated posts which make bi-amping or bi-wiring possible. Motion 15 has a Custom 5-way tool-less binding posts which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
RTi A3 has a back and front firing port whereas Motion 15 has a rear firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk RTi A3's and MartinLogan 15's external dimensions. Polk RTi A3 has external dimensions of 374.7 x 214.4 x 355.6mm ( 14.7 x 8.4 x 14.0inch) whereas MartinLogan 15 has external dimensions of 290.0 x 173.0 x 240.0mm ( 11.4 x 6.8 x 9.4inch) .
Polk RTi A3 is clearly the larger of the two speakers. Its body is 41.4mm wider, 84.7mm taller and 115.6mm deeper than MartinLogan 15.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk RTi A3 is approximately 762.4cm2 / 118.2inch2 and base area of the MartinLogan 15 is approximately 415.2cm2 / 64.4inch2. The RTi A3 requires 84% more surface area than the Motion 15 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk RTi A3 weighs 7.26kg / 16lbs and the MartinLogan 15 weighs 5.40kg / 11.9lbs. This makes the RTi A3 34% heavier than the Motion 15.
Here is a comparison of how RTi A3 and Motion 15's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk RTi A3?
Here are the items that are included inside the box of RTi A3:
2 Cherry bookshelf speakers 2 Self-tapping screws 8 Self-adhesive rubber feet Owner's Manual Template Online registration sheet Polk Audio product brochure
What's in the Box of MartinLogan 15?
Here are the items that come with the Motion 15:
Bookshelf loudspeaker Grille 4 Rubber feet Users Manual Warranty/Registration Information
Nominal Impedance |
8 ohms
vs
5 ohms
|
Less selective with amplifiers |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
50 Hz
vs
60 Hz
|
Generates deeper bass |
High Frequency Response |
26k Hz
vs
25k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Max Input Power |
200 watts
vs
150 watts
|
Handle more power from your amplifier |
Sensitivity |
92 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Height |
290mm
vs
374mm
|
Easier to fit in smaller spaces |
Base Surface Area |
415cm2 (173x240mm)
vs
762cm2 (214x355mm)
|
Takes less floor space |
General |
Polk Audio RTi A3 |
MartinLogan Motion 15 |
Brand |
Polk Audio |
MartinLogan |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-150 watts |
20-200 watts |
Sensitivity |
89 dB |
92 dB |
Impedance |
8 ohms |
5 ohms |
Frequency Response |
50-26k Hz |
60-25k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
5.25" |
Woofer Composition |
Polymer composite |
Aluminum |
Woofer Surround Material |
Butyl rubber |
Rubber |
Tweeter Size |
1" |
1.0 x 1.4" |
Tweeter Type |
Dome |
Folded Motion |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2800Hz |
2700Hz |
Firing Direction |
back and front |
rear |
Suggested Break-in Period |
n/a |
Allow 72 hours of break-in at 90 dB |
Physical Specs |
|
|
Height |
374.7mm (14.8") |
290.0mm (11.4") |
Width |
214.4mm (8.4") |
173.0mm (6.8") |
Depth |
355.6mm (14") |
240.0mm (9.4") |
Weight |
7.26kg (16lbs) |
5.40kg (11.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Real wood veneer |
Piano Lacquer |
Available Colors |
Black, Cherry |
Gloss Black, Matt White, Red Walnut |
Mounting Bracket |
Keyhole |
No |
Recommended Stand Height |
24-31" |
24-30" |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Yrs w/ Registration |
Labor Warranty |
5 Years |
5 Yrs w/ Registration |