In this review, we will be comparing RTi A1 and EVO4.1, two Passive Bookshelf speakers from Polk Audio and Wharfedale. Let's have a brief look at the main features
of Polk RTi A1 and Wharfedale EVO4.1 first before getting into our more
detailed comparison.
What size room are the Polk RTi A1 and Wharfedale EVO4.1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk RTi A1 and Wharfedale EVO4.1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RTi A1 and EVO4.1 are 2-way speakers.
Driver |
Polk RTi A1 |
Wharfedale EVO4.1 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1.18x2.36-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.25-inch
|
1 x 5-inch
|
RTi A1 features a 1" silk polymer composite Dome Tweeter and 1 x 5.25" Polymer composite Woofer with a Crossover frequency at 1900Hz. On the other hand, the EVO4.1 features a 1.18x2.36" AMT (Ribbon) Tweeter and 1 x 5" Kevlar Woofer .
Frequency Response
RTi A1 has a frequency range of 60-26k Hz whereas EVO4.1 has a frequency range of 64-22k Hz. With a minimum frequency of 60Hz, the RTi A1 can go slightly deeper then the EVO4.1's min frequency of 64Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RTi A1 and EVO4.1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RTi A1 sensitivity is rated at 89 dB and the EVO4.1's is at 87 dB. This 2 dB difference makes the Polk RTi A1 a more sensitive speaker compared to Wharfedale EVO4.1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RTi A1 can handle a max power of 125 watts RMS from the amp the whereas EVO4.1 has a max power handling value of 100 watts RMS, 25 watts less than the RTi A1.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both RTi A1 and EVO4.1 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
RTi A1 has a back and front firing port whereas EVO4.1 has a bottom firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk RTi A1's and Wharfedale EVO4.1's external dimensions. Polk RTi A1 has external dimensions of 304.8 x 187.5 x 292.1mm ( 12.0 x 7.3 x 11.5inch) whereas Wharfedale EVO4.1 has external dimensions of 335.0 x 210.0 x 295.0mm ( 13.1 x 8.2 x 11.6inch) .
Wharfedale EVO4.1 is clearly the larger of the two speakers. Its body is 22.5mm wider, 30.2mm taller and 2.9mm deeper than Polk RTi A1.
Below you can see the front view size comparison of Polk RTi A1 and Wharfedale EVO4.1 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk RTi A1 is approximately 547.7cm2 / 84.9inch2 and base area of the Wharfedale EVO4.1 is approximately 619.5cm2 / 96.0inch2. The RTi A1 requires 12% less surface area than the EVO4.1 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk RTi A1 weighs 5.44kg / 12lbs and the Wharfedale EVO4.1 weighs 7.80kg / 17.2lbs. This makes the EVO4.1 43% heavier than the RTi A1.
Here is a comparison of how RTi A1 and EVO4.1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk RTi A1?
Here are the items that are included inside the box of RTi A1:
2 Cherry bookshelf speakers 2 Self-tapping screws 8 Self-adhesive rubber feet Owner's Manual Template Online registration sheet Polk Audio product brochure
What's in the Box of Wharfedale EVO4.1?
Here are the items that come with the EVO4.1:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
Max Input Power |
125 watts
vs
100 watts
|
Handle more power from your amplifier |
Sensitivity |
89 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
60 Hz
vs
64 Hz
|
Generates deeper bass |
High Frequency Response |
26k Hz
vs
22k Hz
|
Generates higher frequency |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Height |
304mm
vs
335mm
|
Easier to fit in smaller spaces |
Base Surface Area |
547cm2 (187x292mm)
vs
619cm2 (210x295mm)
|
Takes less floor space |
Price per pair* |
382USD
vs
799USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Polk Audio RTi A1 |
Wharfedale EVO4.1 |
Brand |
Polk Audio |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-125 watts |
25-100 watts |
Sensitivity |
89 dB |
87 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
3.5 ohms |
Frequency Response |
60-26k Hz |
64-22k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
5" |
Woofer Composition |
Polymer composite |
Kevlar |
Woofer Surround Material |
Butyl rubber |
Rubber |
Tweeter Size |
1" |
1.18x2.36" |
Tweeter Type |
Dome |
AMT (Ribbon) |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1900Hz |
n/a |
Firing Direction |
back and front |
bottom |
Physical Specs |
|
|
Height |
304.8mm (12") |
335.0mm (13.2") |
Width |
187.5mm (7.4") |
210.0mm (8.3") |
Depth |
292.1mm (11.5") |
295.0mm (11.6") |
Weight |
5.44kg (12lbs) |
7.80kg (17.2lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Real wood veneer |
MDF/Wood-veneer |
Available Colors |
Black, Cherry |
Walnut,Black,White |
Mounting Bracket |
Keyhole |
No |
Recommended Stand Height |
28-36" |
24-26" |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |