In this review, we will be comparing L200 and 3020i, two Passive Bookshelf speakers from Polk Audio and Q Acoustics. Let's have a brief look at the main features
of Polk L200 and Q Acoustics 3020i first before getting into our more
detailed comparison.
What size room are the Polk L200 and Q Acoustics 3020i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk L200 and Q Acoustics 3020i compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both L200 and 3020i are 2-way speakers.
Driver |
Polk L200 |
Q Acoustics 3020i |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
0.9-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 5-inch
|
L200 features a 1" Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer with a Crossover frequency at 2600Hz. On the other hand, the 3020i features a 0.9" decoupled Tweeter and 1 x 5" Coated paper Woofer with a Crossover frequency at 2400Hz and 2400Hz.
Frequency Response
L200 has a frequency range of 46-38k Hz whereas 3020i has a frequency range of 64-30k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
L200 is a 4 ohms speaker compared to the 3020i which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the L200 can provide this impedance level.
These two speakers also have different sensitivity levels. L200 sensitivity is rated at 85.5 dB and the 3020i's is rated at 88 dB. This 2 dB difference makes the Q Acoustics 3020i a more sensitive speaker compared to Polk L200, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
L200 can handle a max power of 200 watts RMS from the amp the whereas 3020i has a max power handling value of 75 watts RMS, 125 watts less than the L200.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
L200 features Post posts which make bi-amping or bi-wiring possible. 3020i has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both L200 and 3020i have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk L200's and Q Acoustics 3020i's external dimensions. Polk L200 has external dimensions of 399.0 x 213.0 x 339.0mm ( 15-11/16 x 8-3/8 x 13-5/16inch) whereas Q Acoustics 3020i has external dimensions of 278.0 x 170.0 x 282.0mm ( 10.9 x 6.6 x 11.1inch) .
Polk L200 is clearly the larger of the two speakers. Its body is 43mm wider, 121mm taller and 57mm deeper than Q Acoustics 3020i.
Below you can see the front view size comparison of Polk L200 and Q Acoustics 3020i in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk L200 is approximately 722.1cm2 / 111.9inch2 and base area of the Q Acoustics 3020i is approximately 479.4cm2 / 74.3inch2. The L200 requires 51% more surface area than the 3020i which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk L200 weighs 10.00kg / 22lbs and the Q Acoustics 3020i weighs 4.80kg / 10.6lbs. This makes the L200 108% heavier than the 3020i.
Here is a comparison of how L200 and 3020i's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk L200?
Here are the items that are included inside the box of L200:
2 Bookshelf loudspeakers 2 Grilles Cleaning cloth Owners Manual Online Registration
What's in the Box of Q Acoustics 3020i?
Here are the items that come with the 3020i:
2 x 3020i bookshelf speakers 2 x Foam Bungs 2 x Speaker Grilles 1 x User Manual 1 x Handling Gloves 8 x Rubber Speaker Grips
Max Input Power |
200 watts
vs
75 watts
|
Handle more power from your amplifier |
Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
High Frequency Response |
38k Hz
vs
30k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
Minimum Impedance |
4 ohms
vs
3 ohms
|
Very low impedance levels puts more pressure on amplifier |
Height |
278mm
vs
399mm
|
Easier to fit in smaller spaces |
Base Surface Area |
479cm2 (170x282mm)
vs
722cm2 (213x339mm)
|
Takes less floor space |
Price per pair* |
399USD
vs
1499USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Polk Audio Legend L200 |
Q Acoustics 3020i |
Brand |
Polk Audio |
Q Acoustics |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
30-200 watts |
25-75 watts |
Sensitivity |
85.5 dB |
88 dB |
Impedance |
4 ohms |
6 ohms |
Impedance |
3 ohms |
4 ohms |
Frequency Response |
46-38k Hz |
64-30k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
5" |
Woofer Composition |
Polypropylene |
Coated paper |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
0.9" |
Tweeter Type |
Ring Radiator |
decoupled |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2600Hz |
2400Hz and 2400Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
399.0mm (15.7") |
278.0mm (10.9") |
Width |
213.0mm (8.4") |
170.0mm (6.7") |
Depth |
339.0mm (13.3") |
282.0mm (11.1") |
Weight |
10.00kg (22lbs) |
4.80kg (10.6lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood veneer |
n/a |
Available Colors |
Brown Walnut, Black Ash |
Walnut, Black, White, Grey |
Mounting Bracket |
No |
No |
Recommended Stand Height |
22-26" |
n/a |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
4 Years |
Labor Warranty |
5 Years |
4 Years |