In this review, we will be comparing L200 and L200, two Passive Bookshelf speakers by Polk Audio Let's have a brief look at the main features
of Polk L200 and Polk L200 first before getting into our more
detailed comparison.
L200 and L200 are members of Polk Audio's Legend L series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk L200 and Polk L200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk L200 and Polk L200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both L200 and L200 are 2-way speakers.
Driver |
Polk L200 |
Polk L200 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
L200 features a 1" Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer with a Crossover frequency at 2600Hz. On the other hand, the L200 features a 1" Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer with a Crossover frequency at 2600Hz.
Frequency Response
L200 and L200 has exactly the same frequency range of 46-38k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
L200 and L200 have the same Impedance of 4 ohms and their sensitivity is also same at 86 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the L200 and the L200 can provide this impedance level.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
L200 and L200 has the same power range of 30-200 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both L200 and L200 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Both L200 and L200 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk L200's and Polk L200's external dimensions. Polk L200 has external dimensions of 399.0 x 213.0 x 339.0mm ( 15-11/16 x 8-3/8 x 13-5/16inch) whereas Polk L200 has external dimensions of 399.0 x 213.0 x 339.0mm ( 15-11/16 x 8-3/8 x 13-5/16inch) .
In this case, we can see that Polk L200 and Polk L200 have the exact same height, width and thickness.
Below you can see the front view size comparison of Polk L200 and Polk L200 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk L200 is approximately 722.1cm2 / 111.9inch2 and base area of the Polk L200 is approximately 722.1cm2 / 111.9inch2.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk L200 weighs 10.00kg / 22lbs and the Polk L200 weighs 10.00kg / 22lbs.
Here is a comparison of how L200 and L200's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk L200?
Here are the items that are included inside the box of L200:
2 Bookshelf loudspeakers 2 Grilles Cleaning cloth Owners Manual Online Registration
What's in the Box of Polk L200?
Here are the items that come with the L200:
2 Bookshelf loudspeakers 2 Grilles Cleaning cloth Owners Manual Online Registration
General |
Polk Audio Legend L200 |
Polk Audio Legend L200 |
Brand |
Polk Audio |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
30-200 watts |
30-200 watts |
Sensitivity |
85.5 dB |
85.5 dB |
Impedance |
4 ohms |
4 ohms |
Impedance |
3 ohms |
3 ohms |
Frequency Response |
46-38k Hz |
46-38k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Polypropylene |
Polypropylene |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Ring Radiator |
Ring Radiator |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2600Hz |
2600Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
399.0mm (15.7") |
399.0mm (15.7") |
Width |
213.0mm (8.4") |
213.0mm (8.4") |
Depth |
339.0mm (13.3") |
339.0mm (13.3") |
Weight |
10.00kg (22lbs) |
10.00kg (22lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood veneer |
MDF/Wood veneer |
Available Colors |
Brown Walnut, Black Ash |
Brown Walnut, Black Ash |
Mounting Bracket |
No |
No |
Recommended Stand Height |
22-26" |
22-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |