In this review, we will be comparing CP-WT260 and CWM7.5 S2, two Passive In-wall speakers from Monitor Audio and Bowers Wilkins. Let's have a brief look at the main features
of Monitor Audio CP-WT260 and B&W CWM7.5 S2 first before getting into our more
detailed comparison.
What size room are the Monitor Audio CP-WT260 and B&W CWM7.5 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio CP-WT260 and B&W CWM7.5 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both CP-WT260 and CWM7.5 S2 are 2-way speakers.
Driver |
Monitor Audio CP-WT260 |
B&W CWM7.5 S2 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6-inch
|
1 x 5-inch
|
CP-WT260 features a 1" Hard-Dome Tweeter and 1 x 6" C-CAM Woofer . On the other hand, the CWM7.5 S2 features a 1" Soft-Dome Tweeter and 1 x 5" Continuum Woofer .
Frequency Response
CP-WT260 has a frequency range of 65-25kHz whereas CWM7.5 S2 has a frequency range of 45-28kHz. With a minimum frequency of 45Hz, the CWM7.5 S2 can go significantly deeper on the low side and provide stronger bass compared to the CP-WT260's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
CP-WT260 is a 6 ohms speaker compared to the CWM7.5 S2 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. CP-WT260 sensitivity is rated at 88 dB and the CWM7.5 S2's is rated at 86 dB. This 2 dB difference makes the Monitor Audio CP-WT260 a more sensitive speaker compared to B&W CWM7.5 S2, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
CP-WT260 can handle a max power of 150 watts RMS from the amp the whereas CP-WT260 has a max power handling value of 65 watts RMS , 85 watts less than the CWM7.5 S2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
CP-WT260 features Sprint post type posts and CWM7.5 S2 has a Sprint post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio CP-WT260's and B&W CWM7.5 S2's external dimensions. Monitor Audio CP-WT260 has external dimensions of 380.0 x 228.0 x 96.0mm ( 14.9375-inch x 8.9375-inch x 3.7500-inch) whereas B&W CWM7.5 S2 has external dimensions of 331.0 x 189.0 x 104.0mm ( 13.0000-inch x 7.4375-inch x 4.0625-inch) .
B&W CWM7.5 S2 is 39mm narrower and 49mm shorter than Monitor Audio CP-WT260 but it is also 8mm deeper.
What's in the Box of Monitor Audio CP-WT260?
Here are the items that are included inside the box of CP-WT260:
In-wall speakerMagnetic grilleCosmetic scrimInstallation GuideImportant Safety InstructionsLimited Warranty/Registration CardMountingTemplate
What's in the Box of B&W CWM7.5 S2?
Here are the items that come with the CWM7.5 S2:
In-wall loudspeakerMounting frameGrilleBaffle box2 Mounting plates (1 pre-installed)Paint shieldTwo-piece foam port plug3 Screws3 Lock-washers2 Wing-nuts2 FastenersCutout TemplateInstallation InstructionsWarranty Information