In this review, we will be comparing Motion 15i and L200, two Passive Bookshelf speakers from MartinLogan and Polk Audio. Let's have a brief look at the main features
of MartinLogan 15i and Polk L200 first before getting into our more
detailed comparison.
What size room are the MartinLogan 15i and Polk L200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MartinLogan 15i and Polk L200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Motion 15i and L200 are 2-way speakers.
Driver |
MartinLogan 15i |
Polk L200 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1.0 x 1.4-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Motion 15i features a 1.0 x 1.4" Folded Motion Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2700Hz. On the other hand, the L200 features a 1" Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer with a Crossover frequency at 2600Hz.
Frequency Response
Motion 15i has a frequency range of 60-25k Hz whereas L200 has a frequency range of 46-38k Hz. With a minimum frequency of 46Hz, the L200 can go significantly deeper on the low side and provide stronger bass compared to the Motion 15i's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion 15i is a 5 ohms speaker compared to the L200 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the L200 can provide this impedance level.
These two speakers also have different sensitivity levels. Motion 15i sensitivity is rated at 92 dB and the L200's is rated at 85.5 dB. This 6 dB difference makes the MartinLogan 15i a more sensitive speaker compared to Polk L200, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
L200 features Post posts which make bi-amping or bi-wiring possible. Motion 15i has a Custom 5-way tool-less binding posts which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Motion 15i and L200 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan 15i's and Polk L200's external dimensions. MartinLogan 15i has external dimensions of 290.0 x 173.0 x 240.0mm ( 11.4 x 6.8 x 9.4inch) whereas Polk L200 has external dimensions of 399.0 x 213.0 x 339.0mm ( 15-11/16 x 8-3/8 x 13-5/16inch) .
Polk L200 is clearly the larger of the two speakers. Its body is 40mm wider, 109mm taller and 99mm deeper than MartinLogan 15i.
Below you can see the front view size comparison of MartinLogan 15i and Polk L200 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan 15i is approximately 415.2cm2 / 64.4inch2 and base area of the Polk L200 is approximately 722.1cm2 / 111.9inch2. The Motion 15i requires 43% less surface area than the L200 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MartinLogan 15i weighs 5.40kg / 11.9lbs and the Polk L200 weighs 10.00kg / 22lbs. This makes the L200 85% heavier than the Motion 15i.
Here is a comparison of how Motion 15i and L200's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of MartinLogan 15i?
Here are the items that are included inside the box of Motion 15i:
Bookshelf loudspeaker Grille 4 Rubber feet Users Manual Warranty/Registration Information
What's in the Box of Polk L200?
Here are the items that come with the L200:
2 Bookshelf loudspeakers 2 Grilles Cleaning cloth Owners Manual Online Registration
Sensitivity |
92 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
5 ohms
vs
4 ohms
|
Less selective with amplifiers |
Height |
290mm
vs
399mm
|
Easier to fit in smaller spaces |
Base Surface Area |
415cm2 (173x240mm)
vs
722cm2 (213x339mm)
|
Takes less floor space |
Price per pair* |
900USD
vs
1499USD
|
costs less (*prices may change depending on the seller, location and time) |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
46 Hz
vs
60 Hz
|
Generates deeper bass |
High Frequency Response |
38k Hz
vs
25k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
General |
MartinLogan Motion 15i |
Polk Audio Legend L200 |
Brand |
MartinLogan |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-200 watts |
30-200 watts |
Sensitivity |
92 dB |
85.5 dB |
Impedance |
5 ohms |
4 ohms |
Impedance |
n/a |
3 ohms |
Frequency Response |
60-25k Hz |
46-38k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
Aluminum |
Polypropylene |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1.0 x 1.4" |
1" |
Tweeter Type |
Folded Motion |
Ring Radiator |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2700Hz |
2600Hz |
Firing Direction |
rear |
rear |
Suggested Break-in Period |
Allow 72 hours of break-in at 90 dB |
n/a |
Physical Specs |
|
|
Height |
290.0mm (11.4") |
399.0mm (15.7") |
Width |
173.0mm (6.8") |
213.0mm (8.4") |
Depth |
240.0mm (9.4") |
339.0mm (13.3") |
Weight |
5.40kg (11.9lbs) |
10.00kg (22lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Lacquer |
MDF/Wood veneer |
Available Colors |
Gloss Black, Matt White, Red Walnut |
Brown Walnut, Black Ash |
Mounting Bracket |
No |
No |
Recommended Stand Height |
26-28" |
22-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |