In this review, we will be comparing RP-8060FA and BP-9080X, two Passive Floor-standing speakers from Klipsch and Definitive Technology. Let's have a brief look at the main features
of Klipsch RP-8060FA and Definitive BP-9080X first before getting into our more
detailed comparison.
What size room are the Klipsch RP-8060FA and Definitive BP-9080X speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-8060FA and Definitive BP-9080X compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that RP-8060FA is a 2-way design whereas the BP-9080X is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Klipsch RP-8060FA |
Definitive BP-9080X |
Driver Setup
|
2-way
|
3-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
4 x 5.25-inch |
Woofer
|
2 x 8-inch
|
1 x 12-inch
|
RP-8060FA features a 1" titanium Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer . On the other hand, the BP-9080X features a 1" annealed aluminum dome Tweeter , a 5.25" Midrange and 1 x 12" Polypropelene Woofer .
Frequency Response
RP-8060FA has a frequency range of 32-25k Hz whereas BP-9080X has a frequency range of 16-40k Hz. With a minimum frequency of 16Hz, the BP-9080X can go significantly deeper on the low side and provide stronger bass compared to the RP-8060FA's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Impedance and Sensitivity
RP-8060FA and BP-9080X have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-8060FA sensitivity is rated at 98 dB and the BP-9080X's is at 92 dB. This 6 dB difference makes the Klipsch RP-8060FA a more sensitive speaker compared to Definitive BP-9080X, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-8060FA can handle a max power of 300 watts RMS from the amp the whereas RP-8060FA has a max power handling value of 150 watts RMS , 150 watts less than the BP-9080X.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-8060FA features Binding post posts which make bi-amping or bi-wiring possible. BP-9080X has a 5-Way post, RCA which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-8060FA's and Definitive BP-9080X's external dimensions. Klipsch RP-8060FA has external dimensions of 1099.0 x 277.0 x 504.0mm ( 43-1/4 x 10-7/8 x 19-13/16inch) whereas Definitive BP-9080X has external dimensions of 1309.0 x 318.0 x 410.0mm ( 51-1/2 x 12-1/2 x 16-1/8inch) .
Klipsch RP-8060FA is 41mm narrower and 210mm shorter than Definitive BP-9080X but it is also 94mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-8060FA is approximately 1396.1cm2 / 216.4inch2 and base area of the Definitive BP-9080X is approximately 1303.8cm2 / 202.1inch2. The RP-8060FA requires 7% more surface area than the BP-9080X which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-8060FA weighs 32.30kg / 71.1lbs and the Definitive BP-9080X weighs 28.18kg / 62lbs. This makes the RP-8060FA 15% heavier than the BP-9080X.
Here is a comparison of how RP-8060FA and BP-9080X's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch RP-8060FA?
Here are the items that are included inside the box of RP-8060FA:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Definitive BP-9080X?
Here are the items that come with the BP-9080X:
Tower loudspeaker6.5-feet AC power cordTop-grille (installed)Stabilizer base4 Floor guides4 Carpet spikes4 Screws4 NutsOwners ManualWhat Obsession Sounds Like card
Sensitivity |
98 dB
vs
92 dB
|
Play louder with same amount of amplification power |
Number of Woofers |
2
vs
1
|
More woofers |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
1099mm
vs
1309mm
|
Easier to fit in smaller spaces |
Price per pair* |
3078USD
vs
3998USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
300 watts
vs
150 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
Low Frequency Response |
16 Hz
vs
32 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
25k Hz
|
Generates higher frequency |
Passive Radiator |
2 x 12-inch
vs
None
|
Increases the bass performance |
Base Surface Area |
1303cm2 (318x410mm)
vs
1396cm2 (277x504mm)
|
Takes less floor space |
General |
Klipsch Reference Premiere RP-8060FA |
Definitive Technology BP-9080X |
Brand |
Klipsch |
Definitive Technology |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
up to 150 watts |
50-300 watts |
Sensitivity |
98 dB |
92 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
32-25k Hz |
16-40k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
1 |
Woofer Size |
8" |
12" |
Woofer Composition |
Cerametallic |
Polypropelene |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Tractrix Horn |
dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
5.25" |
Firing Direction |
rear |
n/a |
Physical Specs |
|
|
Height |
1099.0mm (43.3") |
1309.0mm (51.5") |
Width |
277.0mm (10.9") |
318.0mm (12.5") |
Depth |
504.0mm (19.8") |
410.0mm (16.1") |
Weight |
32.30kg (71.1lbs) |
28.18kg (62lbs) |
Enclosure |
Bass Reflex |
Passive Radiator |
Finish |
MDF/Wood-grain vinyl |
MDF/Aluminum/Cloth |
Available Colors |
Walnut, Ebony |
Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |