In this review, we will be comparing RP-600M II and EVO4.1, two Passive Bookshelf speakers from Klipsch and Wharfedale. Let's have a brief look at the main features
of Klipsch RP-600M II and Wharfedale EVO4.1 first before getting into our more
detailed comparison.
What size room are the Klipsch RP-600M II and Wharfedale EVO4.1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-600M II and Wharfedale EVO4.1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-600M II and EVO4.1 are 2-way speakers.
Driver |
Klipsch RP-600M II |
Wharfedale EVO4.1 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1.18x2.36-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 5-inch
|
RP-600M II features a 1" titanium Hybrid Tractrix Horn Tweeter and 1 x 6.5" Cerametallic cone Woofer with a Crossover frequency at 1500 Hz. On the other hand, the EVO4.1 features a 1.18x2.36" AMT (Ribbon) Tweeter and 1 x 5" Kevlar Woofer .
Frequency Response
RP-600M II has a frequency range of 44-25k Hz whereas EVO4.1 has a frequency range of 64-22k Hz. With a minimum frequency of 44Hz, the RP-600M II can go significantly deeper on the low side and provide stronger bass compared to the EVO4.1's min frequency of 64Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-600M II and EVO4.1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-600M II sensitivity is rated at 94.5 dB and the EVO4.1's is at 87 dB. This 7 dB difference makes the Klipsch RP-600M II a more sensitive speaker compared to Wharfedale EVO4.1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both RP-600M II and EVO4.1 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
RP-600M II has a rear firing port whereas EVO4.1 has a bottom firing ports. Wharfedale EVO4.1's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-600M II with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-600M II's and Wharfedale EVO4.1's external dimensions. Klipsch RP-600M II has external dimensions of 402.0 x 204.0 x 332.0mm ( 15-13/16 x 8 x 13-1/16inch) whereas Wharfedale EVO4.1 has external dimensions of 335.0 x 210.0 x 295.0mm ( 13.1 x 8.2 x 11.6inch) .
Wharfedale EVO4.1 is 67mm shorter and 37mm less deeper than Klipsch RP-600M II but it is also 6mm wider.
Below you can see the front view size comparison of Klipsch RP-600M II and Wharfedale EVO4.1 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-600M II is approximately 677.3cm2 / 105.0inch2 and base area of the Wharfedale EVO4.1 is approximately 619.5cm2 / 96.0inch2. The RP-600M II requires 9% more surface area than the EVO4.1 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-600M II weighs 8.20kg / 18lbs and the Wharfedale EVO4.1 weighs 7.80kg / 17.2lbs. This makes the RP-600M II 5% heavier than the EVO4.1.
Here is a comparison of how RP-600M II and EVO4.1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch RP-600M II?
Here are the items that are included inside the box of RP-600M II:
2 Bookshelf loudspeakers2 Grilles4 Terminal jumpers (pre-installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Wharfedale EVO4.1?
Here are the items that come with the EVO4.1:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
Sensitivity |
94 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
44 Hz
vs
64 Hz
|
Generates deeper bass |
High Frequency Response |
25k Hz
vs
22k Hz
|
Generates higher frequency |
Price per pair* |
459USD
vs
799USD
|
costs less (*prices may change depending on the seller, location and time) |
Height |
335mm
vs
402mm
|
Easier to fit in smaller spaces |
Base Surface Area |
619cm2 (210x295mm)
vs
677cm2 (204x332mm)
|
Takes less floor space |
General |
Klipsch Reference Premiere RP-600M II |
Wharfedale EVO4.1 |
Brand |
Klipsch |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 100 watts |
25-100 watts |
Sensitivity |
94.5 dB |
87 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
3.5 ohms |
Frequency Response |
44-25k Hz |
64-22k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
5" |
Woofer Composition |
Cerametallic cone |
Kevlar |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1.18x2.36" |
Tweeter Type |
Hybrid Tractrix Horn |
AMT (Ribbon) |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1500 Hz |
n/a |
Firing Direction |
rear |
bottom |
Physical Specs |
|
|
Height |
402.0mm (15.8") |
335.0mm (13.2") |
Width |
204.0mm (8") |
210.0mm (8.3") |
Depth |
332.0mm (13.1") |
295.0mm (11.6") |
Weight |
8.20kg (18lbs) |
7.80kg (17.2lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Wood-veneer |
Available Colors |
Walnut, Black |
Walnut,Black,White |
Mounting Bracket |
|
No |
Recommended Stand Height |
22-26" |
24-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |