In this review, we will be comparing RP-500M II and Bronze 1, two Passive Bookshelf speakers from Klipsch and Monitor Audio. Let's have a brief look at the main features
of Klipsch RP-500M II and Monitor Audio Bronze 1 first before getting into our more
detailed comparison.
What size room are the Klipsch RP-500M II and Monitor Audio Bronze 1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-500M II and Monitor Audio Bronze 1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-500M II and Bronze 1 are 2-way speakers.
Driver |
Klipsch RP-500M II |
Monitor Audio Bronze 1 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.25-inch
|
1 x 5.5-inch
|
RP-500M II features a 1" titanium Hybrid Tractrix Horn Tweeter and 1 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1530 Hz. On the other hand, the Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz.
Frequency Response
RP-500M II has a frequency range of 50-25k Hz whereas Bronze 1 has a frequency range of 55-30k Hz. With a minimum frequency of 50Hz, the RP-500M II can go significantly deeper on the low side and provide stronger bass compared to the Bronze 1's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-500M II and Bronze 1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-500M II sensitivity is rated at 92 dB and the Bronze 1's is at 88 dB. This 4 dB difference makes the Klipsch RP-500M II a more sensitive speaker compared to Monitor Audio Bronze 1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-500M II can handle a max power of 75 watts RMS from the amp the whereas Bronze 1 has a max power handling value of 70 watts RMS, 5 watts less than the RP-500M II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-500M II features Post type posts and Bronze 1 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both RP-500M II and Bronze 1 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-500M II's and Monitor Audio Bronze 1's external dimensions. Klipsch RP-500M II has external dimensions of 345.0 x 175.0 x 270.0mm ( 13-9/16 x 6-7/8 x 10-5/8inch) whereas Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm ( 10.2 x 6.4 x 8.0inch) .
Klipsch RP-500M II is clearly the larger of the two speakers. Its body is 10mm wider, 85mm taller and 65mm deeper than Monitor Audio Bronze 1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-500M II is approximately 472.5cm2 / 73.2inch2 and base area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2. The RP-500M II requires 40% more surface area than the Bronze 1 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-500M II weighs 6.00kg / 13.2lbs and the Monitor Audio Bronze 1 weighs 3.50kg / 7.7lbs. This makes the RP-500M II 71% heavier than the Bronze 1.
Here is a comparison of how RP-500M II and Bronze 1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch RP-500M II?
Here are the items that are included inside the box of RP-500M II:
2 Bookshelf loudspeakers2 GrillesUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Monitor Audio Bronze 1?
Here are the items that come with the Bronze 1:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
Max Input Power |
75 watts
vs
70 watts
|
Handle more power from your amplifier |
Sensitivity |
92 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
50 Hz
vs
55 Hz
|
Generates deeper bass |
Woofer Size |
5.5 inches
vs
5.25 inches
|
Larger woofer |
High Frequency Response |
30k Hz
vs
25k Hz
|
Generates higher frequency |
Height |
260mm
vs
345mm
|
Easier to fit in smaller spaces |
Base Surface Area |
338cm2 (165x205mm)
vs
472cm2 (175x270mm)
|
Takes less floor space |
General |
Klipsch Reference Premiere RP-500M II |
Monitor Audio Bronze 1 |
Brand |
Klipsch |
Monitor Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 75 watts |
20-70 watts |
Sensitivity |
92 dB |
88 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
50-25k Hz |
55-30k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
5.5" |
Woofer Composition |
Cerametallic cone |
C-CAM |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Hybrid Tractrix Horn |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1530 Hz |
2700Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
345.0mm (13.6") |
260.0mm (10.2") |
Width |
175.0mm (6.9") |
165.0mm (6.5") |
Depth |
270.0mm (10.6") |
205.0mm (8.1") |
Weight |
6.00kg (13.2lbs) |
3.50kg (7.7lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
Available Colors |
Walnut, Black |
Walnut, White, Rosemah, Black |
Mounting Bracket |
|
No |
Recommended Stand Height |
24-28" |
30-31" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |