In this review, we will be comparing RP-5000F II and S 809, two Passive Floor-standing speakers from Klipsch and Jamo. Let's have a brief look at the main features
of Klipsch RP-5000F II and Jamo S 809 first before getting into our more
detailed comparison.
What size room are the Klipsch RP-5000F II and Jamo S 809 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-5000F II and Jamo S 809 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-5000F II and S 809 are 2-way speakers.
Driver |
Klipsch RP-5000F II |
Jamo S 809 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 5.25-inch
|
3 x 5-inch
|
RP-5000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1900 Hz. On the other hand, the S 809 features a 1" Tweeter and 3 x 5" Aluminized Polyfiber Woofer with a Crossover frequency at 2000Hz.
Frequency Response
RP-5000F II has a frequency range of 35-25k Hz whereas S 809 has a frequency range of 37-26k Hz. With a minimum frequency of 35Hz, the RP-5000F II can go slightly deeper then the S 809's min frequency of 37Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-5000F II and S 809 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-5000F II sensitivity is rated at 95 dB and the S 809's is at 90 dB. This 5 dB difference makes the Klipsch RP-5000F II a more sensitive speaker compared to Jamo S 809, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-5000F II can handle a max power of 120 watts RMS from the amp the whereas RP-5000F II has a max power handling value of 100 watts RMS , 20 watts less than the S 809.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-5000F II features Binding post posts which make bi-amping or bi-wiring possible. S 809 has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
RP-5000F II has a rear firing port whereas S 809 has a front firing ports. Jamo S 809's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-5000F II with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-5000F II's and Jamo S 809's external dimensions. Klipsch RP-5000F II has external dimensions of 918.0 x 208.0 x 364.0mm ( 36-1/8 x 8-3/16 x 14-5/16inch) whereas Jamo S 809 has external dimensions of 1042.0 x 191.0 x 252.0mm ( 41.0 x 7.5 x 9.9inch) .
Jamo S 809 is 17mm narrower and 112mm less deeper than Klipsch RP-5000F II but it is also 124mm taller.
Below you can see the front view size comparison of Klipsch RP-5000F II and Jamo S 809 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-5000F II is approximately 757.1cm2 / 117.4inch2 and base area of the Jamo S 809 is approximately 481.3cm2 / 74.6inch2. The RP-5000F II requires 57% more surface area than the S 809 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-5000F II weighs 17.50kg / 38.5lbs and the Jamo S 809 weighs 13.60kg / 29.9lbs. This makes the RP-5000F II 29% heavier than the S 809.
Here is a comparison of how RP-5000F II and S 809's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch RP-5000F II?
Here are the items that are included inside the box of RP-5000F II:
Floorstanding loudspeakerStabilizer feet (pre-installed)Grille2 Terminal jumpers (pre-installed)Rubber cap (pre-installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Jamo S 809?
Here are the items that come with the S 809:
2 Floorstanding loudspeakers2 Grilles8 Mounting feet16 ScrewsUser ManualImportant Safety InstructionsWarranty Information
Sensitivity |
95 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
35 Hz
vs
37 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
918mm
vs
1042mm
|
Easier to fit in smaller spaces |
Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
Number of Woofers |
3
vs
2
|
More woofers |
High Frequency Response |
26k Hz
vs
25k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Base Surface Area |
481cm2 (191x252mm)
vs
757cm2 (208x364mm)
|
Takes less floor space |
Price per pair* |
634USD
vs
1198USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Klipsch Reference Premiere RP-5000F II |
Jamo Studio S 809 |
Brand |
Klipsch |
Jamo |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
up to 100 watts |
120 watts |
Sensitivity |
95 dB |
90 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
35-25k Hz |
37-26k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
3 |
Woofer Size |
5.25" |
5" |
Woofer Composition |
Cerametallic cone |
Aluminized Polyfiber |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Tractrix Horn |
n/a |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1900 Hz |
2000Hz |
Firing Direction |
rear |
front |
Physical Specs |
|
|
Height |
918.0mm (36.1") |
1042.0mm (41") |
Width |
208.0mm (8.2") |
191.0mm (7.5") |
Depth |
364.0mm (14.3") |
252.0mm (9.9") |
Weight |
17.50kg (38.5lbs) |
13.60kg (29.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Vinyl |
Available Colors |
Walnut, Black |
Walnut |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |