In this review, we will be comparing RP-160M and 3030i, two Passive Bookshelf speakers from Klipsch and Q Acoustics. Let's have a brief look at the main features
of Klipsch RP-160M and Q Acoustics 3030i first before getting into our more
detailed comparison.
What size room are the Klipsch RP-160M and Q Acoustics 3030i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-160M and Q Acoustics 3030i compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-160M and 3030i are 2-way speakers.
Driver |
Klipsch RP-160M |
Q Acoustics 3030i |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
RP-160M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz. On the other hand, the 3030i features a 1" decoupled Tweeter and 1 x 6.5" Coated paper Woofer with a Crossover frequency at 2400Hz.
Frequency Response
RP-160M has a frequency range of 45-25k Hz whereas 3030i has a frequency range of 46-30k Hz. With a minimum frequency of 45Hz, the RP-160M can go slightly deeper then the 3030i's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-160M is a 8 ohms speaker compared to the 3030i which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. RP-160M sensitivity is rated at 95 dB and the 3030i's is rated at 88 dB. This 7 dB difference makes the Klipsch RP-160M a more sensitive speaker compared to Q Acoustics 3030i, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-160M can handle a max power of 100 watts RMS from the amp the whereas 3030i has a max power handling value of 75 watts RMS, 25 watts less than the RP-160M.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-160M features Dual binding posts posts which make bi-amping or bi-wiring possible. 3030i has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both RP-160M and 3030i have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-160M's and Q Acoustics 3030i's external dimensions. Klipsch RP-160M has external dimensions of 424.0 x 224.0 x 327.0mm ( 16.6 x 8.8 x 12.8inch) whereas Q Acoustics 3030i has external dimensions of 325.0 x 200.0 x 329.0mm ( 12.7 x 7.8 x 12.9inch) .
Q Acoustics 3030i is 24mm narrower and 99mm shorter than Klipsch RP-160M but it is also 2mm deeper.
Below you can see the front view size comparison of Klipsch RP-160M and Q Acoustics 3030i in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-160M is approximately 732.5cm2 / 113.5inch2 and base area of the Q Acoustics 3030i is approximately 658.0cm2 / 102.0inch2. The RP-160M requires 11% more surface area than the 3030i which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-160M weighs 9.03kg / 19.9lbs and the Q Acoustics 3030i weighs 6.20kg / 13.6lbs. This makes the RP-160M 46% heavier than the 3030i.
Here is a comparison of how RP-160M and 3030i's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch RP-160M?
Here are the items that are included inside the box of RP-160M:
2 Bookshelf loudspeakers 2 Detachable magnetic grilles User Manual Warranty Information Important Safety Instructions
What's in the Box of Q Acoustics 3030i?
Here are the items that come with the 3030i:
2 x 3030i bookshelf speakers 2 x Speaker Grilles 2 x Foam Bungs 1 x User Manual
Max Input Power |
100 watts
vs
75 watts
|
Handle more power from your amplifier |
Sensitivity |
95 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Low Frequency Response |
45 Hz
vs
46 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
High Frequency Response |
30k Hz
vs
25k Hz
|
Generates higher frequency |
Height |
325mm
vs
424mm
|
Easier to fit in smaller spaces |
Base Surface Area |
658cm2 (200x329mm)
vs
732cm2 (224x327mm)
|
Takes less floor space |
General |
Klipsch Reference Premiere RP-160M |
Q Acoustics 3030i |
Brand |
Klipsch |
Q Acoustics |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 100 watts |
25-75 watts |
Sensitivity |
95 dB |
88 dB |
Impedance |
8 ohms |
6 ohms |
Impedance |
n/a |
4 ohms |
Frequency Response |
45-25k Hz |
46-30k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Cerametallic |
Coated paper |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Tractrix Horn |
decoupled |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1500Hz |
2400Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
424.0mm (16.7") |
325.0mm (12.8") |
Width |
224.0mm (8.8") |
200.0mm (7.9") |
Depth |
327.0mm (12.9") |
329.0mm (13") |
Weight |
9.03kg (19.9lbs) |
6.20kg (13.6lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
n/a |
Available Colors |
Ebony, Cherry |
Walnut, Black, White |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-28" |
n/a |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
4 Years |
Labor Warranty |
5 Years |
4 Years |