In this review, we will be comparing Kendall and EVO4.4, two Passive Floor-standing speakers from KLH and Wharfedale.
Let's have a brief look at the main features
of KLH Kendall and Wharfedale EVO4.4 first before getting into our more
detailed comparison.
KLH Kendall Key Specs
- 3-way Design
- 1" Tweeter
- 5.25" Midrange
- 2 x 6.5" Woven Kevlar Woofer
- 25-23k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 250watts
- Weight:22.14kg
- Dimensions (H x W x D): 1021.0" x 8-5/16" x 14-15/16"( 1021.0 x 212.0 x 380.0mm )
Wharfedale EVO4.4 Key Specs
- 3-way Design
- 1.18x2.36" AMT (Ribbon) Tweeter
- 2" Midrange
- 2 x 6.5" Kevlar Woofer
- 2" Midrange
- 44-22k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-200watts
- Weight:25.60kg
- Dimensions (H x W x D): 1060.0" x 9.8" x 14.2"( 1060.0 x 250.0 x 360.0mm )
In the following sections, we will get into more detail in order to better understand how the KLH Kendall and Wharfedale EVO4.4 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Kendall and EVO4.4 are 3-way speakers.
| Driver |
KLH Kendall |
Wharfedale EVO4.4 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1.18x2.36-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 2-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
Kendall features a 1" anodized aluminum Tweeter , a 5.25" Midrange and 2 x 6.5" Woven Kevlar Woofer . On the other hand, the EVO4.4 features a 1.18x2.36" AMT (Ribbon) Tweeter , a 2" Midrange and 2 x 6.5" Kevlar Woofer .
Frequency Response
Kendall has a frequency range of 25-23k Hz whereas EVO4.4 has a frequency range of 44-22k Hz. With a minimum frequency of 25Hz, the Kendall can go significantly deeper on the low side and provide stronger bass compared to the EVO4.4's min frequency of 44Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Kendall and EVO4.4 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Kendall sensitivity is rated at 96 dB and the EVO4.4's is at 89 dB. This 7 dB difference makes the KLH Kendall a more sensitive speaker compared to Wharfedale EVO4.4, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Kendall can handle a max power of 200 watts RMS from the amp the whereas Kendall has a max power handling value of watts RMS , 200 watts less than the EVO4.4.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Kendall and EVO4.4 features dual binding post speaker terminals for bi-amping or bi-wiring.
KLH Kendall's Binding post terminals allows Bi-amping or bi-wiring
Wharfedale EVO4.4's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KLH Kendall's and Wharfedale EVO4.4's external dimensions. KLH Kendall has external dimensions of 1021.0 x 212.0 x 380.0mm ( 40-3/16 x 8-5/16 x 14-15/16inch) whereas Wharfedale EVO4.4 has external dimensions of 1060.0 x 250.0 x 360.0mm ( 41.7 x 9.8 x 14.2inch) .
KLH Kendall is 38mm narrower and 39mm shorter than Wharfedale EVO4.4 but it is also 20mm deeper.
Below you can see the front view size comparison of KLH Kendall and Wharfedale EVO4.4 in scale.
Comparison image of KLH Kendall and Wharfedale EVO4.4 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KLH Kendall is approximately 805.6cm2 / 124.9inch2 and base area of the Wharfedale EVO4.4 is approximately 90.0cm2 / 14.0inch2. The Kendall requires 795% more surface area than the EVO4.4 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KLH Kendall weighs 22.14kg / 48.7lbs and the Wharfedale EVO4.4 weighs 25.60kg / 56.3lbs. This makes the EVO4.4 16% heavier than the Kendall.
Here is a comparison of how Kendall and EVO4.4's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of KLH Kendall?
Here are the items that are included inside the box of Kendall:
Floorstanding loudspeakerGrilleFoam port4 Rubber feet4 Spike feet (with nuts)4 Protective discsManual
What's in the Box of Wharfedale EVO4.4?
Here are the items that come with the EVO4.4:
Floorstanding loudspeaker Grille 4 Outrigger feet (pre-installed) 4 Spikes (pre-installed) 4 Isolation pucks 2 Jumper-bars (pre-installed) Pair of white cloth gloves User Manual
 Sensitivity |
96 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
25 Hz
vs
44 Hz
|
Generates deeper bass |
 High Frequency Response |
23k Hz
vs
22k Hz
|
Generates higher frequency |
 Height |
1021mm
vs
1060mm
|
Easier to fit in smaller spaces |
 Price per pair* |
1500USD
vs
2198USD
|
costs less (*prices may change depending on the seller, location and time) |
 Base Surface Area |
90cm2
vs
805cm2
|
Takes less floor space |
| General |
KLH Kendall |
Wharfedale EVO4.4 |
| Brand |
KLH |
Wharfedale |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 250 watts |
30-200 watts |
| Sensitivity |
96 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
4.3 ohms |
| Frequency Response |
25-23k Hz |
44-22k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Woven Kevlar |
Kevlar |
| Woofer Surround Material |
Butyl Rubber |
Rubber |
| Tweeter Size |
1" |
1.18x2.36" |
| Tweeter Type |
n/a |
AMT (Ribbon) |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
2" |
| Firing Direction |
n/a |
bottom |
Physical Specs |
|
|
| Height |
1021.0mm (40.2") |
1060.0mm (41.7") |
| Width |
212.0mm (8.3") |
250.0mm (9.8") |
| Depth |
380.0mm (15") |
360.0mm (14.2") |
| Weight |
22.14kg (48.7lbs) |
25.60kg (56.3lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood Veneer |
MDF/Wood-veneer |
| Available Colors |
Black |
Walnut |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
10 Years |
5 Years |
| Labor Warranty |
10 Years |
5 Years |