In this review, we will be comparing Q750 and S60, two Passive Floor-standing speakers from KEF and Polk Audio. Let's have a brief look at the main features
of KEF Q750 and Polk S60 first before getting into our more
detailed comparison.
What size room are the KEF Q750 and Polk S60 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the KEF Q750 and Polk S60 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Q750 and S60 are 2-way speakers.
Driver |
KEF Q750 |
Polk S60 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 6.5-inch
|
3 x 6.5-inch
|
Q750 features a 1" vented aluminum Dome Tweeter and 2 x 6.5" Aluminum Woofer with a Crossover frequency at 2500Hz. On the other hand, the S60 features a 1" Terylene Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Q750 has a frequency range of 48-28k Hz whereas S60 has a frequency range of 26-40k Hz. With a minimum frequency of 26Hz, the S60 can go significantly deeper on the low side and provide stronger bass compared to the Q750's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q750 and S60 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Q750 sensitivity is rated at 88 dB and the S60's is at 90 dB. This 2 dB difference makes the Polk S60 a more sensitive speaker compared to KEF Q750, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Q750 can handle a max power of 300 watts RMS from the amp the whereas Q750 has a max power handling value of 150 watts RMS , 150 watts less than the S60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S60 features 5-way post posts which make bi-amping or bi-wiring possible. Q750 has a Binding post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Q750 has a front firing port whereas S60 has a bottom firing ports. KEF Q750's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk S60 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Q750's and Polk S60's external dimensions. KEF Q750 has external dimensions of 945.0 x 328.0 x 315.0mm ( 37-3/16 x 12-7/8 x 12-3/8inch) whereas Polk S60 has external dimensions of 1131.0 x 299.0 x 401.0mm ( 44-1/2 x 11-3/4 x 15-3/4inch) .
KEF Q750 is 186mm shorter and 86mm less deeper than Polk S60 but it is also 29mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Q750 is approximately 1033.2cm2 / 160.1inch2 and base area of the Polk S60 is approximately 1199.0cm2 / 185.8inch2. The Q750 requires 14% less surface area than the S60 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF Q750 weighs 16.59kg / 36.5lbs and the Polk S60 weighs 23.60kg / 51.9lbs. This makes the S60 42% heavier than the Q750.
Here is a comparison of how Q750 and S60's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of KEF Q750?
Here are the items that are included inside the box of Q750:
Floorstanding loudspeaker2 Outrigger feet4 Spikes6 Screws6 Washers4 Rubber insertsHex-keyOwners ManualWarranty Information
What's in the Box of Polk S60?
Here are the items that come with the S60:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
Passive Radiator |
2 x 6.25-inch
vs
None
|
Increases the bass performance |
Dolby Atmos Drivers |
Optional
vs
No
|
Dolby Atmos Compatibility |
Height |
945mm
vs
1131mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1033cm2 (328x315mm)
vs
1199cm2 (299x401mm)
|
Takes less floor space |
Max Input Power |
300 watts
vs
150 watts
|
Handle more power from your amplifier |
Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Number of Woofers |
3
vs
2
|
More woofers |
Low Frequency Response |
26 Hz
vs
48 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Price per pair* |
898USD
vs
1800USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
KEF Q750 |
Polk Audio Signature S60 |
Brand |
KEF |
Polk Audio |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
15-150 watts |
20-300 watts |
Sensitivity |
88 dB |
90 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
3.8 ohms |
n/a |
Frequency Response |
48-28k Hz |
26-40k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
3 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Aluminum |
Mica-reinforced polypropylene |
Woofer Surround Material |
Rubber |
Butyl rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2500Hz |
2500Hz |
Firing Direction |
front |
bottom |
Physical Specs |
|
|
Height |
945.0mm (37.2") |
1131.0mm (44.5") |
Width |
328.0mm (12.9") |
299.0mm (11.8") |
Depth |
315.0mm (12.4") |
401.0mm (15.8") |
Weight |
16.59kg (36.5lbs) |
23.60kg (51.9lbs) |
Enclosure |
Passive Radiator |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
Meddite MDF |
Available Colors |
Walnut |
Black |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |