In this review, we will be comparing Q350 and RTi A1, two Passive Bookshelf speakers from KEF and Polk Audio. Let's have a brief look at the main features
of KEF Q350 and Polk RTi A1 first before getting into our more
detailed comparison.
What size room are the KEF Q350 and Polk RTi A1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the KEF Q350 and Polk RTi A1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Q350 and RTi A1 are 2-way speakers.
Driver |
KEF Q350 |
Polk RTi A1 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
Q350 features a 1" vented aluminum Dome Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2500Hz. On the other hand, the RTi A1 features a 1" silk polymer composite Dome Tweeter and 1 x 5.25" Polymer composite Woofer with a Crossover frequency at 1900Hz.
Frequency Response
Q350 has a frequency range of 63-28k Hz whereas RTi A1 has a frequency range of 60-26k Hz. With a minimum frequency of 60Hz, the RTi A1 can go slightly deeper then the Q350's min frequency of 63Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q350 and RTi A1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Q350 sensitivity is rated at 87 dB and the RTi A1's is at 89 dB. This 2 dB difference makes the Polk RTi A1 a more sensitive speaker compared to KEF Q350, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Q350 can handle a max power of 125 watts RMS from the amp the whereas Q350 has a max power handling value of 120 watts RMS , 5 watts less than the RTi A1.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RTi A1 features Pair of Dual 5-way Binding Posts - Gold-Plated posts which make bi-amping or bi-wiring possible. Q350 has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Q350 has a rear firing port whereas RTi A1 has a back and front firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Q350's and Polk RTi A1's external dimensions. KEF Q350 has external dimensions of 358.0 x 210.0 x 306.0mm ( 14.0 x 8.2 x 12.0inch) whereas Polk RTi A1 has external dimensions of 304.8 x 187.5 x 292.1mm ( 12.0 x 7.3 x 11.5inch) .
KEF Q350 is clearly the larger of the two speakers. Its body is 22.5mm wider, 53.2mm taller and 13.9mm deeper than Polk RTi A1.
Below you can see the front view size comparison of KEF Q350 and Polk RTi A1 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Q350 is approximately 642.6cm2 / 99.6inch2 and base area of the Polk RTi A1 is approximately 547.7cm2 / 84.9inch2. The Q350 requires 17% more surface area than the RTi A1 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF Q350 weighs 7.60kg / 16.7lbs and the Polk RTi A1 weighs 5.44kg / 12lbs. This makes the Q350 40% heavier than the RTi A1.
Here is a comparison of how Q350 and RTi A1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF Q350?
Here are the items that are included inside the box of Q350:
2 Bookshelf loudspeakers 2 Foam port plugs 8 Self-adhesive rubber feet Owner's Manual Warranty Registration Card
What's in the Box of Polk RTi A1?
Here are the items that come with the RTi A1:
2 Cherry bookshelf speakers 2 Self-tapping screws 8 Self-adhesive rubber feet Owner's Manual Template Online registration sheet Polk Audio product brochure
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
High Frequency Response |
28k Hz
vs
26k Hz
|
Generates higher frequency |
Max Input Power |
125 watts
vs
120 watts
|
Handle more power from your amplifier |
Sensitivity |
89 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
60 Hz
vs
63 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Height |
304mm
vs
358mm
|
Easier to fit in smaller spaces |
Base Surface Area |
547cm2 (187x292mm)
vs
642cm2 (210x306mm)
|
Takes less floor space |
Price per pair* |
382USD
vs
750USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
KEF Q350 |
Polk Audio RTi A1 |
Brand |
KEF |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
10-120 watts |
20-125 watts |
Sensitivity |
87 dB |
89 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
3.7 ohms |
n/a |
Frequency Response |
63-28k Hz |
60-26k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
5.25" |
Woofer Composition |
Aluminum |
Polymer composite |
Woofer Surround Material |
Rubber |
Butyl rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2500Hz |
1900Hz |
Firing Direction |
rear |
back and front |
Physical Specs |
|
|
Height |
358.0mm (14.1") |
304.8mm (12") |
Width |
210.0mm (8.3") |
187.5mm (7.4") |
Depth |
306.0mm (12") |
292.1mm (11.5") |
Weight |
7.60kg (16.7lbs) |
5.44kg (12lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Vinyl-wrapped |
Real wood veneer |
Available Colors |
Black, Walnut, White |
Black, Cherry |
Mounting Bracket |
No |
Keyhole |
Recommended Stand Height |
18-24" |
28-36" |
Grille |
Yes |
n/a |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |