In this review, we will be comparing LSX II and R-15PM, two Powered Bookshelf speakers from KEF and Klipsch. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of KEF LSX II and Klipsch R-15PM first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the KEF LSX II and Klipsch R-15PM compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both LSX II and R-15PM are 2-way speakers.
Driver |
KEF LSX II |
Klipsch R-15PM |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
0.75-inch
|
1.0-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 4.5-inch
|
1 x 5.25-inch
|
LSX II features a 0.75" Aluminum Hard-Dome Tweeter and 1 x 4.5" Magnesium/Aluminium alloy Woofer . On the other hand, the R-15PM features a 1.0" Aluminum Hard-Dome Tweeter and 1 x 5.25" Copper-spun IMG Woofer with a Crossover frequency at 1800Hz.
Frequency Response
LSX II has a frequency range of 54-28k Hz whereas R-15PM has a frequency range of 62-24k Hz. With a minimum frequency of 54Hz, the LSX II can go significantly deeper on the low side and provide stronger bass compared to the R-15PM's min frequency of 62Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both LSX II and R-15PM have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF LSX II's and Klipsch R-15PM's external dimensions. KEF LSX II has external dimensions of 240 × 155 × 180 mm ( 9.5 × 6.1 × 7.1 inch) whereas Klipsch R-15PM has external dimensions of 317.5 x 177.8 x 250.8mm ( 12.5 x 7 x 9.875inch) .
Klipsch R-15PM is clearly the larger of the two speakers. Its body is 22.8mm wider, 77.5mm taller and 70.8mm deeper than KEF LSX II.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF LSX II is approximately 279.0cm2 / 43.2inch2 and base area of the Klipsch R-15PM is approximately 445.9cm2 / 69.1inch2. The LSX II requires 37% less surface area than the R-15PM which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF LSX II weighs 3.60kg / 7.9lbs and the Klipsch R-15PM weighs 4.67kg / 10.3lbs. This makes the R-15PM 30% heavier than the LSX II.
Here is a comparison of how LSX II and R-15PM's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF LSX II?
Here are the items that are included inside the box of LSX II:
2 Wireless powered speakersTwo 6.5-feet AC power cords10-feet Cat-6 interconnect speaker cableRemote control2 AAA batteries Quick Start Guide Important Safety Information Warranty Information Maintenance Guide
What's in the Box of Klipsch R-15PM?
Here are the items that come with the R-15PM:
Powered speaker (right)Passive speaker (left)68-inch AC power cordRemote controlCR2025 3V battery (installed in remote)16-feet Length of 18AWG speaker wire (bare tinned wire on each end)6.5-feet USB-A to USB-B cable6-feet Stereo RCA cable5-feet Optical digital cable8 Self-adhesive rubber feetInstruction BookletWarranty InformationImportant Safety Instructions
Low Frequency Response |
54 Hz
vs
62 Hz
|
Generates deeper bass |
High Frequency Response |
28k Hz
vs
24k Hz
|
Generates higher frequency |
App-Based Control |
Apple iOS, Android
vs
None
|
Control the speaker via an app |
Height |
240mm
vs
317mm
|
Easier to fit in smaller spaces |
Base Surface Area |
279cm2 (155x180mm)
vs
445cm2 (177x250mm)
|
Takes less floor space |
Ethernet Connection |
Yes
vs
No
|
High quality streaming over Ethernet |
USB Port |
USB-C (connects to your computer)
vs
No
|
USB port adds flexibility |
HDMI Input |
ARC
vs
No
|
Connect HDMI sources directly |
Woofer Size |
5.25 inches
vs
4.5 inches
|
Larger woofer |
Price per pair* |
499USD
vs
1299USD
|
costs less (*prices may change depending on the seller, location and time) |
RCA Connection |
Yes
vs
No
|
Connection via RCA input |
Phono Input |
Yes
vs
No
|
Connect your turntable directly |
General |
KEF LSX II |
Klipsch Reference R-15PM |
Brand |
KEF |
Klipsch |
Speaker Type |
Powered Stereo Speakers |
Powered Stereo Speakers |
Frequency Response |
54-28k Hz |
62-24k Hz |
Amplifier |
|
|
Watts RMS (Continuous) |
200-watt RMS |
100-watt RMS |
Max Bit Depth |
24-bit |
24-bit |
Max Sample Rate |
384 kHz |
96 kHz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
4.5" |
5.25" |
Woofer Composition |
Magnesium/Aluminium alloy |
Copper-spun IMG |
Woofer Surround Material |
Rubber |
n/a |
Tweeter Size |
0.75" |
1.0" |
Tweeter Type |
Hard-Dome |
Hard-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
1800Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
240.0mm (9.4") |
317.5mm (12.5") |
Width |
155.0mm (6.1") |
177.8mm (7") |
Depth |
180.0mm (7.1") |
250.8mm (9.9") |
Weight |
3.60kg (7.9lbs) |
4.67kg (10.3lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Available Colors |
Carbon Black, Mineral White, Cobalt Blue, Lava Red, and Soundwave |
n/a |
Mounting Bracket |
No |
No |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Aux Inputs |
3.5mm |
3.5mm, RCA |
USB Port |
USB-C (connects to your computer) |
Type-B |
Phone Input |
No |
Yes |
Subwoofer Output |
Wired |
Wired |
Digital Input |
Optical |
Optical |
HDMI Input |
ARC |
No |
Headphone Jack |
No |
No |
Ethernet Port |
Yes |
No |
Other |
|
|
Parts Warranty |
1 Year |
1 Year |
Labor Warranty |
1 Year |
1 Year |