In this review, we will be comparing LS50 and EVO4.2, two Passive Bookshelf speakers from KEF and Wharfedale. Let's have a brief look at the main features
of KEF LS50 and Wharfedale EVO4.2 first before getting into our more
detailed comparison.
What size room are the KEF LS50 and Wharfedale EVO4.2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the KEF LS50 and Wharfedale EVO4.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that LS50 is a 2-way design whereas the EVO4.2 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
KEF LS50 |
Wharfedale EVO4.2 |
Driver Setup
|
2-way
|
3-way
|
Tweeter
|
1-inch
|
1.18x2.36-inch
|
Midrange
|
- |
1 x 2-inch |
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
LS50 features a 1" Aluminum Vented dome Tweeter and 1 x 5.25" Magnesium/aluminum alloy Woofer with a Crossover frequency at 2200Hz. On the other hand, the EVO4.2 features a 1.18x2.36" AMT (Ribbon) Tweeter , a 2" Midrange and 1 x 6.5" Kevlar Woofer .
Frequency Response
LS50 has a frequency range of 79-28k Hz whereas EVO4.2 has a frequency range of 54-22k Hz. With a minimum frequency of 54Hz, the EVO4.2 can go significantly deeper on the low side and provide stronger bass compared to the LS50's min frequency of 79Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
LS50 and EVO4.2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. LS50 sensitivity is rated at 85 dB and the EVO4.2's is at 88 dB. This 3 dB difference makes the Wharfedale EVO4.2 a more sensitive speaker compared to KEF LS50, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
LS50 can handle a max power of 120 watts RMS from the amp the whereas LS50 has a max power handling value of 100 watts RMS , 20 watts less than the EVO4.2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
EVO4.2 features Post posts which make bi-amping or bi-wiring possible. LS50 has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
LS50 has a rear firing port whereas EVO4.2 has a bottom firing ports. Wharfedale EVO4.2's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to KEF LS50 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF LS50's and Wharfedale EVO4.2's external dimensions. KEF LS50 has external dimensions of 302.0 x 200.0 x 278.0mm ( 11.8 x 7.8 x 10.9inch) whereas Wharfedale EVO4.2 has external dimensions of 455.0 x 250.0 x 350.0mm ( 17.9 x 9.8 x 13.7inch) .
Wharfedale EVO4.2 is clearly the larger of the two speakers. Its body is 50mm wider, 153mm taller and 72mm deeper than KEF LS50.
Below you can see the front view size comparison of KEF LS50 and Wharfedale EVO4.2 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF LS50 is approximately 556.0cm2 / 86.2inch2 and base area of the Wharfedale EVO4.2 is approximately 875.0cm2 / 135.6inch2. The LS50 requires 36% less surface area than the EVO4.2 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF LS50 weighs 7.20kg / 15.8lbs and the Wharfedale EVO4.2 weighs 13.40kg / 29.5lbs. This makes the EVO4.2 86% heavier than the LS50.
Here is a comparison of how LS50 and EVO4.2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF LS50?
Here are the items that are included inside the box of LS50:
2 Bookshelf loudspeakers 2 Foam port plugs 8 Self-adhesive rubber feet Owner's Manual Warranty Registration Card
What's in the Box of Wharfedale EVO4.2?
Here are the items that come with the EVO4.2:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
High Frequency Response |
28k Hz
vs
22k Hz
|
Generates higher frequency |
Height |
302mm
vs
455mm
|
Easier to fit in smaller spaces |
Base Surface Area |
556cm2 (200x278mm)
vs
875cm2 (250x350mm)
|
Takes less floor space |
Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
88 dB
vs
85 dB
|
Play louder with same amount of amplification power |
Minimum Impedance |
4 ohms
vs
3.2 ohms
|
Very low impedance levels puts more pressure on amplifier |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
54 Hz
vs
79 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
General |
KEF LS50 |
Wharfedale EVO4.2 |
Brand |
KEF |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
25-100 watts |
25-120 watts |
Sensitivity |
85 dB |
88 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
3.2 ohms |
4 ohms |
Frequency Response |
79-28k Hz |
54-22k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
Magnesium/aluminum alloy |
Kevlar |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1.18x2.36" |
Tweeter Type |
Vented dome |
AMT (Ribbon) |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
2" |
Crossover Frequency |
2200Hz |
n/a |
Firing Direction |
rear |
bottom |
Physical Specs |
|
|
Height |
302.0mm (11.9") |
455.0mm (17.9") |
Width |
200.0mm (7.9") |
250.0mm (9.8") |
Depth |
278.0mm (10.9") |
350.0mm (13.8") |
Weight |
7.20kg (15.8lbs) |
13.40kg (29.5lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Polymer/Lacquer |
MDF/Wood-veneer |
Available Colors |
Black, High Gloss Piano Black, High Gloss Piano White |
Walnut,Black,White |
Mounting Bracket |
No |
No |
Recommended Stand Height |
18-28" |
18-22" |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |