In this review, we will be comparing S 803 and TSi200, two Passive Bookshelf speakers from Jamo and Polk Audio. Let's have a brief look at the main features
of Jamo S 803 and Polk TSi200 first before getting into our more
detailed comparison.
What size room are the Jamo S 803 and Polk TSi200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo S 803 and Polk TSi200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S 803 and TSi200 are 2-way speakers.
Driver |
Jamo S 803 |
Polk TSi200 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5-inch
|
2 x 5.25-inch
|
S 803 features a 1" Soft-Dome Tweeter and 1 x 5" Aluminized Polyfiber Woofer . On the other hand, the TSi200 features a 1" Dome Tweeter and 2 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz.
Frequency Response
S 803 has a frequency range of 57-26k Hz whereas TSi200 has a frequency range of 50-24k Hz. With a minimum frequency of 50Hz, the TSi200 can go significantly deeper on the low side and provide stronger bass compared to the S 803's min frequency of 57Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S 803 and TSi200 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S 803 sensitivity is rated at 87 dB and the TSi200's is at 89 dB. This 2 dB difference makes the Polk TSi200 a more sensitive speaker compared to Jamo S 803, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S 803 can handle a max power of 150 watts RMS from the amp the whereas S 803 has a max power handling value of 80 watts RMS , 70 watts less than the TSi200.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S 803 features Pair of 5-way binding posts - Gold-plated type posts and TSi200 has a Pair of 5-way binding posts - Gold-plated type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
S 803 has a front firing port whereas TSi200 has a rear firing ports. Jamo S 803's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk TSi200 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo S 803's and Polk TSi200's external dimensions. Jamo S 803 has external dimensions of 353.0 x 191.0 x 252.0mm ( 13.8 x 7.5 x 9.9inch) whereas Polk TSi200 has external dimensions of 392.1 x 203.2 x 298.5mm ( 15.4 x 8.0 x 11.7inch) .
Polk TSi200 is clearly the larger of the two speakers. Its body is 12.2mm wider, 39.1mm taller and 46.5mm deeper than Jamo S 803.
Below you can see the front view size comparison of Jamo S 803 and Polk TSi200 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo S 803 is approximately 481.3cm2 / 74.6inch2 and base area of the Polk TSi200 is approximately 606.6cm2 / 94.0inch2. The S 803 requires 21% less surface area than the TSi200 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo S 803 weighs 5.40kg / 11.9lbs and the Polk TSi200 weighs 7.71kg / 17lbs. This makes the TSi200 43% heavier than the S 803.
Here is a comparison of how S 803 and TSi200's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Jamo S 803?
Here are the items that are included inside the box of S 803:
2 Bookshelf loudspeakers 2 Grilles User Manual Important Safety Instructions Warranty Information
What's in the Box of Polk TSi200?
Here are the items that come with the TSi200:
2 Black bookshelf speakers Detachable cloth grille (installed) 8 Self-adhesive rubber feet Owner's Manual Online registration sheet Polk Audio product brochure
High Frequency Response |
26k Hz
vs
24k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Height |
353mm
vs
392mm
|
Easier to fit in smaller spaces |
Base Surface Area |
481cm2 (191x252mm)
vs
606cm2 (203x298mm)
|
Takes less floor space |
Price per pair* |
229USD
vs
279USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
150 watts
vs
80 watts
|
Handle more power from your amplifier |
Sensitivity |
89 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
Number of Woofers |
2
vs
1
|
More woofers |
Low Frequency Response |
50 Hz
vs
57 Hz
|
Generates deeper bass |
General |
Jamo S 803 |
Polk Audio TSi200 |
Brand |
Jamo |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 80 watts |
20-150 watts |
Sensitivity |
87 dB |
89 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
57-26k Hz |
50-24k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
2 |
Woofer Size |
5" |
5.25" |
Woofer Composition |
Aluminized Polyfiber |
Organic Fiber |
Woofer Surround Material |
Rubber |
Butyl Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Soft-Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
2500Hz |
Firing Direction |
front |
rear |
Physical Specs |
|
|
Height |
353.0mm (13.9") |
392.1mm (15.4") |
Width |
191.0mm (7.5") |
203.2mm (8") |
Depth |
252.0mm (9.9") |
298.5mm (11.8") |
Weight |
5.40kg (11.9lbs) |
7.71kg (17lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Vinyl |
Wood-grain vinyl |
Available Colors |
Walnut, Black, White |
Black, Cherry |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-28" |
16-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |