In this review, we will be comparing S 801 and RP-500M, two Passive Bookshelf speakers from Jamo and Klipsch. Let's have a brief look at the main features
of Jamo S 801 and Klipsch RP-500M first before getting into our more
detailed comparison.
What size room are the Jamo S 801 and Klipsch RP-500M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo S 801 and Klipsch RP-500M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S 801 and RP-500M are 2-way speakers.
Driver |
Jamo S 801 |
Klipsch RP-500M |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 4-inch
|
1 x 5.25-inch
|
S 801 features a 1" Soft-Dome Tweeter and 1 x 4" Aluminized Polyfiber Woofer . On the other hand, the RP-500M features a 1" Tractrix Horn Tweeter and 1 x 5.25" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
S 801 has a frequency range of 76-26k Hz whereas RP-500M has a frequency range of 48-25k Hz. With a minimum frequency of 48Hz, the RP-500M can go significantly deeper on the low side and provide stronger bass compared to the S 801's min frequency of 76Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S 801 and RP-500M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S 801 sensitivity is rated at 85 dB and the RP-500M's is at 93 dB. This 8 dB difference makes the Klipsch RP-500M a more sensitive speaker compared to Jamo S 801, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S 801 can handle a max power of 75 watts RMS from the amp the whereas S 801 has a max power handling value of 60 watts RMS , 15 watts less than the RP-500M.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S 801 features Single binding posts type posts and RP-500M has a Single binding posts type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both S 801 and RP-500M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo S 801's and Klipsch RP-500M's external dimensions. Jamo S 801 has external dimensions of 285.0 x 156.0 x 163.0mm ( 11.2 x 6.1 x 6.4inch) whereas Klipsch RP-500M has external dimensions of 343.0 x 173.0 x 241.0mm ( 13.5 x 6.8 x 9.4inch) .
Klipsch RP-500M is clearly the larger of the two speakers. Its body is 17mm wider, 58mm taller and 78mm deeper than Jamo S 801.
Below you can see the front view size comparison of Jamo S 801 and Klipsch RP-500M in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo S 801 is approximately 254.3cm2 / 39.4inch2 and base area of the Klipsch RP-500M is approximately 416.9cm2 / 64.6inch2. The S 801 requires 39% less surface area than the RP-500M which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo S 801 weighs 2.70kg / 5.9lbs and the Klipsch RP-500M weighs 5.40kg / 11.9lbs. This makes the RP-500M 100% heavier than the S 801.
Here is a comparison of how S 801 and RP-500M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Jamo S 801?
Here are the items that are included inside the box of S 801:
2 Bookshelf loudspeakers 2 Grilles User Manual Important Safety Instructions Warranty Information
What's in the Box of Klipsch RP-500M?
Here are the items that come with the RP-500M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet User Manual Important Safety Instructions Warranty Information
High Frequency Response |
26k Hz
vs
25k Hz
|
Generates higher frequency |
Height |
285mm
vs
343mm
|
Easier to fit in smaller spaces |
Base Surface Area |
254cm2 (156x163mm)
vs
416cm2 (173x241mm)
|
Takes less floor space |
Price per pair* |
174USD
vs
579USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
75 watts
vs
60 watts
|
Handle more power from your amplifier |
Sensitivity |
93 dB
vs
85 dB
|
Play louder with same amount of amplification power |
Woofer Size |
5.25 inches
vs
4 inches
|
Larger woofer |
Low Frequency Response |
48 Hz
vs
76 Hz
|
Generates deeper bass |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
General |
Jamo S 801 |
Klipsch Reference Premiere RP-500M |
Brand |
Jamo |
Klipsch |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 60 watts |
up to 75 watts |
Sensitivity |
85 dB |
93 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
76-26k Hz |
48-25k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
4" |
5.25" |
Woofer Composition |
Aluminized Polyfiber |
Cerametallic |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Soft-Dome |
Tractrix Horn |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
1500Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
285.0mm (11.2") |
343.0mm (13.5") |
Width |
156.0mm (6.1") |
173.0mm (6.8") |
Depth |
163.0mm (6.4") |
241.0mm (9.5") |
Weight |
2.70kg (5.9lbs) |
5.40kg (11.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
Available Colors |
Walnut, Black, White |
Ebony, Walnut, Piano Black |
Mounting Bracket |
No |
Keyhole |
Recommended Stand Height |
28-31" |
28-30" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |