In this review, we will be comparing Chora 826 and RP-8000F, two Passive Floor-standing speakers from Focal and Klipsch. Let's have a brief look at the main features
of Focal Chora 826 and Klipsch RP-8000F first before getting into our more
detailed comparison.
What size room are the Focal Chora 826 and Klipsch RP-8000F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Focal Chora 826 and Klipsch RP-8000F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Chora 826 is a 3-way design whereas the RP-8000F is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Focal Chora 826 |
Klipsch RP-8000F |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 6.5-inch |
- |
Woofer
|
2 x 6.5-inch
|
2 x 8-inch
|
Chora 826 features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Slatefiber Woofer with a Crossover frequency at 270Hz and 2700Hz. On the other hand, the RP-8000F features a 1" Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer .
Frequency Response
Chora 826 has a frequency range of 48-28k Hz whereas RP-8000F has a frequency range of 32-25k Hz. With a minimum frequency of 32Hz, the RP-8000F can go significantly deeper on the low side and provide stronger bass compared to the Chora 826's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Chora 826 and RP-8000F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Chora 826 sensitivity is rated at 91 dB and the RP-8000F's is at 98 dB. This 7 dB difference makes the Klipsch RP-8000F a more sensitive speaker compared to Focal Chora 826, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Chora 826 can handle a max power of 250 watts RMS from the amp the whereas RP-8000F has a max power handling value of 150 watts RMS, 100 watts less than the Chora 826.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-8000F features Post posts which make bi-amping or bi-wiring possible. Chora 826 has a Binding post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Chora 826 has a front firing port whereas RP-8000F has a rear firing ports. Focal Chora 826's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-8000F with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Chora 826's and Klipsch RP-8000F's external dimensions. Focal Chora 826 has external dimensions of 1053.0 x 305.0 x 404.0mm ( 41-1/2 x 12 x 15-7/8inch) whereas Klipsch RP-8000F has external dimensions of 1099.0 x 277.0 x 445.0mm ( 43-1/4 x 10-7/8 x 17-1/2inch) .
Focal Chora 826 is 46mm shorter and 41mm less deeper than Klipsch RP-8000F but it is also 28mm wider.
Below you can see the front view size comparison of Focal Chora 826 and Klipsch RP-8000F in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Chora 826 is approximately 1232.2cm2 / 191.0inch2 and base area of the Klipsch RP-8000F is approximately 1232.7cm2 / 191.1inch2. The Chora 826 requires 0% less surface area than the RP-8000F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Chora 826 weighs 21.15kg / 46.5lbs and the Klipsch RP-8000F weighs 27.27kg / 60lbs. This makes the RP-8000F 29% heavier than the Chora 826.
Here is a comparison of how Chora 826 and RP-8000F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Focal Chora 826?
Here are the items that are included inside the box of Chora 826:
Floorstanding loudspeakerBase4 Rubber feet4 Spike feet4 Nuts4 Screws4 WashersHex-keyGrilleUser manual
What's in the Box of Klipsch RP-8000F?
Here are the items that come with the RP-8000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
Max Input Power |
250 watts
vs
150 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
High Frequency Response |
28k Hz
vs
25k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Height |
1053mm
vs
1099mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1232cm2 (305x404mm)
vs
1232cm2 (277x445mm)
|
Takes less floor space |
Sensitivity |
98 dB
vs
91 dB
|
Play louder with same amount of amplification power |
Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
Low Frequency Response |
32 Hz
vs
48 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Price per pair* |
1658USD
vs
2398USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Focal Chora 826 |
Klipsch Reference Premiere RP-8000F |
Brand |
Focal |
Klipsch |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
40-250 watts |
up to 150 watts |
Sensitivity |
91 dB |
98 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
2.9 ohms |
n/a |
Frequency Response |
48-28k Hz |
32-25k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
6.5" |
8" |
Woofer Composition |
Slatefiber |
Cerametallic |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
inverted dome |
Tractrix Horn |
Aimable Tweeter |
No |
No |
Midrange Driver |
6.5" |
No |
Crossover Frequency |
270Hz and 2700Hz |
n/a |
Firing Direction |
front |
rear |
Physical Specs |
|
|
Height |
1053.0mm (41.5") |
1099.0mm (43.3") |
Width |
305.0mm (12") |
277.0mm (10.9") |
Depth |
404.0mm (15.9") |
445.0mm (17.5") |
Weight |
21.15kg (46.5lbs) |
27.27kg (60lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Vinyl-wrap |
MDF/Wood-grain vinyl |
Available Colors |
Black, Dark wood, Light wood |
Walnut, Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |