In this review, we will be comparing Airmotiv B1+ and XT20, two Passive Bookshelf speakers from Emotiva and Polk Audio. Let's have a brief look at the main features
of Emotiva Airmotiv B1+ and Polk XT20 first before getting into our more
detailed comparison.
What size room are the Emotiva Airmotiv B1+ and Polk XT20 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv B1+ and Polk XT20 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv B1+ and XT20 are 2-way speakers.
Driver |
Emotiva Airmotiv B1+ |
Polk XT20 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
25×32 mm-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Airmotiv B1+ features a 25×32 mm" folded ribbon Tweeter and 1 x 5.25" woven fiber cone Woofer with a Crossover frequency at 2000Hz. On the other hand, the XT20 features a 1" Soft-Dome Tweeter and 1 x 6.5" Bi-laminate paper Woofer .
Frequency Response
Airmotiv B1+ has a frequency range of 48 Hz – 28 kHz whereas XT20 has a frequency range of 38-40k Hz. With a minimum frequency of 38Hz, the XT20 can go significantly deeper on the low side and provide stronger bass compared to the Airmotiv B1+'s min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv B1+ and XT20 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Airmotiv B1+ sensitivity is rated at 86 dB and the XT20's is at 87 dB. This 1 dB difference makes the Polk XT20 a more sensitive speaker compared to Emotiva Airmotiv B1+, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv B1+ can handle a max power of 200 watts RMS from the amp the whereas Airmotiv B1+ has a max power handling value of 70 watts RMS , 130 watts less than the XT20.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv B1+'s and Polk XT20's external dimensions. Emotiva Airmotiv B1+ has external dimensions of 274.0 x 181.0 x 210.0mm ( 10-3/4 x 7-1/8 x 8-1/4inch) whereas Polk XT20 has external dimensions of 332.0 x 193.0 x 281.0mm ( 13-1/16 x 7-9/16 x 11-1/16inch) .
Polk XT20 is clearly the larger of the two speakers. Its body is 12mm wider, 58mm taller and 71mm deeper than Emotiva Airmotiv B1+.
Below you can see the front view size comparison of Emotiva Airmotiv B1+ and Polk XT20 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv B1+ is approximately 380.1cm2 / 58.9inch2 and base area of the Polk XT20 is approximately 542.3cm2 / 84.1inch2. The Airmotiv B1+ requires 30% less surface area than the XT20 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Emotiva Airmotiv B1+ weighs 4.00kg / 8.8lbs and the Polk XT20 weighs 5.45kg / 12lbs. This makes the XT20 36% heavier than the Airmotiv B1+.
Here is a comparison of how Airmotiv B1+ and XT20's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk XT20?
Here are the items that come with the XT20:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
Height |
274mm
vs
332mm
|
Easier to fit in smaller spaces |
Base Surface Area |
380cm2 (181x210mm)
vs
542cm2 (193x281mm)
|
Takes less floor space |
Max Input Power |
200 watts
vs
70 watts
|
Handle more power from your amplifier |
Sensitivity |
87 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
38 Hz
vs
48 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
General |
Emotiva Airmotiv B1+ |
Polk Audio Monitor XT20 |
Brand |
Emotiva |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
Up to 70 watts |
30-200 watts |
Sensitivity |
86 dB |
87 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
48 Hz – 28 kHz |
38-40k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
woven fiber cone |
Bi-laminate paper |
Woofer Surround Material |
SBR |
Rubber |
Tweeter Size |
25×32 mm" |
1" |
Tweeter Type |
folded ribbon |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2000Hz |
n/a |
Firing Direction |
rear |
n/a |
Physical Specs |
|
|
Height |
274.0mm (10.8") |
332.0mm (13.1") |
Width |
181.0mm (7.1") |
193.0mm (7.6") |
Depth |
210.0mm (8.3") |
281.0mm (11.1") |
Weight |
4.00kg (8.8lbs) |
5.45kg (12lbs) |
Enclosure |
Bass reflex |
Bass Reflex |
Finish |
HDF |
MDF, Vinyl |
Available Colors |
Black |
Black |
Mounting Bracket |
|
No |
Recommended Stand Height |
n/a |
24-28" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
n/a |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |