In this review, we will be comparing Uni-Fi 2.0 UB52 and TSi100, two Passive Bookshelf speakers from ELAC and Polk Audio. Let's have a brief look at the main features
of ELAC Uni-Fi 2.0 UB52 and Polk TSi100 first before getting into our more
detailed comparison.
What size room are the ELAC Uni-Fi 2.0 UB52 and Polk TSi100 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the ELAC Uni-Fi 2.0 UB52 and Polk TSi100 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Uni-Fi 2.0 UB52 is a 3-way design whereas the TSi100 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
ELAC Uni-Fi 2.0 UB52 |
Polk TSi100 |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 4-inch |
- |
Woofer
|
1 x 5.25-inch
|
1 x 5.25-inch
|
Uni-Fi 2.0 UB52 features a 1" soft dome Tweeter , a 4" Midrange and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 200hZ and 2000HZ. On the other hand, the TSi100 features a 1" Dome Tweeter and 1 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Uni-Fi 2.0 UB52 has a frequency range of 46-35k Hz whereas TSi100 has a frequency range of 61-24k Hz. With a minimum frequency of 46Hz, the Uni-Fi 2.0 UB52 can go significantly deeper on the low side and provide stronger bass compared to the TSi100's min frequency of 61Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Uni-Fi 2.0 UB52 is a 6 ohms speaker compared to the TSi100 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Uni-Fi 2.0 UB52 sensitivity is rated at 85 dB and the TSi100's is rated at 89 dB. This 4 dB difference makes the Polk TSi100 a more sensitive speaker compared to ELAC Uni-Fi 2.0 UB52, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Uni-Fi 2.0 UB52 can handle a max power of 140 watts RMS from the amp the whereas TSi100 has a max power handling value of 100 watts RMS, 40 watts less than the Uni-Fi 2.0 UB52.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Uni-Fi 2.0 UB52 features Pair of 5-way Binding Posts - Gold-Plated type posts and TSi100 has a Pair of 5-way Binding Posts - Gold-Plated type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Uni-Fi 2.0 UB52 has a front firing port whereas TSi100 has a rear firing ports. ELAC Uni-Fi 2.0 UB52's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk TSi100 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Uni-Fi 2.0 UB52's and Polk TSi100's external dimensions. ELAC Uni-Fi 2.0 UB52 has external dimensions of 347.0 x 186.0 x 297.0mm ( 13-5/8 x 7-5/16 x 11-11/16inch) whereas Polk TSi100 has external dimensions of 279.4 x 177.8 x 259.0mm ( 11.0 x 7.0 x 10.1inch) .
ELAC Uni-Fi 2.0 UB52 is clearly the larger of the two speakers. Its body is 8.2mm wider, 67.6mm taller and 38mm deeper than Polk TSi100.
Below you can see the front view size comparison of ELAC Uni-Fi 2.0 UB52 and Polk TSi100 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Uni-Fi 2.0 UB52 is approximately 552.4cm2 / 85.6inch2 and base area of the Polk TSi100 is approximately 460.5cm2 / 71.4inch2. The Uni-Fi 2.0 UB52 requires 20% more surface area than the TSi100 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Uni-Fi 2.0 UB52 weighs 8.30kg / 18.3lbs and the Polk TSi100 weighs 4.53kg / 10lbs. This makes the Uni-Fi 2.0 UB52 83% heavier than the TSi100.
Here is a comparison of how Uni-Fi 2.0 UB52 and TSi100's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of ELAC Uni-Fi 2.0 UB52?
Here are the items that are included inside the box of Uni-Fi 2.0 UB52:
2 Bookshelf loudspeakers2 GrillesOperating Instructions
What's in the Box of Polk TSi100?
Here are the items that come with the TSi100:
2 Black bookshelf speakers Detachable cloth grille (installed) 8 Self-adhesive rubber feet Owner's Manual Wall-Mount template Online registration sheet Polk Audio product brochure
Max Input Power |
140 watts
vs
100 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Low Frequency Response |
46 Hz
vs
61 Hz
|
Generates deeper bass |
High Frequency Response |
35k Hz
vs
24k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Sensitivity |
89 dB
vs
85 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Height |
279mm
vs
347mm
|
Easier to fit in smaller spaces |
Base Surface Area |
460cm2 (177x259mm)
vs
552cm2 (186x297mm)
|
Takes less floor space |
Price per pair* |
149USD
vs
700USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
ELAC Uni-Fi 2.0 UB52 |
Polk Audio TSi100 |
Brand |
ELAC |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
40-140 watts |
20-100 watts |
Sensitivity |
85 dB |
89 dB |
Impedance |
6 ohms |
8 ohms |
Frequency Response |
46-35k Hz |
61-24k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
5.25" |
Woofer Composition |
Aluminum |
Organic Fiber |
Woofer Surround Material |
Rubber |
Butyl Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
soft dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
4" |
No |
Crossover Frequency |
200hZ and 2000HZ |
2500Hz |
Firing Direction |
front |
rear |
Physical Specs |
|
|
Height |
347.0mm (13.7") |
279.4mm (11") |
Width |
186.0mm (7.3") |
177.8mm (7") |
Depth |
297.0mm (11.7") |
259.0mm (10.2") |
Weight |
8.30kg (18.3lbs) |
4.53kg (10lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
Wood-grain vinyl |
Available Colors |
Black |
Black, Cherry |
Mounting Bracket |
No |
Keyhole |
Recommended Stand Height |
24-28" |
16-30" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
3 Years |
5 Years |
Labor Warranty |
3 Years |
5 Years |