In this review, we will be comparing Evoke 30 and Debut 2.0 B6.2, two Passive Bookshelf speakers from Dynaudio and ELAC. Let's have a brief look at the main features
of Dynaudio Evoke 20 and ELAC Debut 2.0 B6.2 first before getting into our more
detailed comparison.
What size room are the Dynaudio Evoke 20 and ELAC Debut 2.0 B6.2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Dynaudio Evoke 20 and ELAC Debut 2.0 B6.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Evoke 30 and Debut 2.0 B6.2 are 2-way speakers.
Driver |
Dynaudio Evoke 20 |
ELAC Debut 2.0 B6.2 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1.1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 7-inch
|
1 x 6.5-inch
|
Evoke 30 features a 1.1" Cerotar with Hexis Tweeter and 1 x 7" Magnesium Silicate Polymer Woofer with a Crossover frequency at 3200Hz. On the other hand, the Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Evoke 30 has a frequency range of 40-23k Hz whereas Debut 2.0 B6.2 has a frequency range of 44-35k Hz. With a minimum frequency of 40Hz, the Evoke 30 can go slightly deeper then the Debut 2.0 B6.2's min frequency of 44Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Evoke 30 and Debut 2.0 B6.2 have the same Impedance of 6 ohms but where they differ is the sensitivity levels. Evoke 30 sensitivity is rated at 86 dB and the Debut 2.0 B6.2's is at 87 dB. This 1 dB difference makes the ELAC Debut 2.0 B6.2 a more sensitive speaker compared to Dynaudio Evoke 20, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Evoke 30 can handle a max power of 180 watts RMS from the amp the whereas Debut 2.0 B6.2 has a max power handling value of 120 watts RMS, 60 watts less than the Evoke 30.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Evoke 30 features 5-Way post type posts and Debut 2.0 B6.2 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Evoke 30 has a rear firing port whereas Debut 2.0 B6.2 has a front firing ports. ELAC Debut 2.0 B6.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Dynaudio Evoke 20 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Evoke 20's and ELAC Debut 2.0 B6.2's external dimensions. Dynaudio Evoke 20 has external dimensions of 380.0 x 215.0 x 343.0mm ( 15 x 8.5 x 12.1inch) whereas ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm ( 14.7 x 7.6 x 10.5inch) .
Dynaudio Evoke 20 is clearly the larger of the two speakers. Its body is 20mm wider, 5mm taller and 75mm deeper than ELAC Debut 2.0 B6.2.
Below you can see the front view size comparison of Dynaudio Evoke 20 and ELAC Debut 2.0 B6.2 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Evoke 20 is approximately 737.5cm2 / 114.3inch2 and base area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2. The Evoke 30 requires 41% more surface area than the Debut 2.0 B6.2 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Dynaudio Evoke 20 weighs 9.90kg / 21.8lbs and the ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs. This makes the Evoke 30 34% heavier than the Debut 2.0 B6.2.
Here is a comparison of how Evoke 30 and Debut 2.0 B6.2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Dynaudio Evoke 20?
Here are the items that are included inside the box of Evoke 30:
What's in the Box of ELAC Debut 2.0 B6.2?
Here are the items that come with the Debut 2.0 B6.2:
2 Bookshelf loudspeakers2 GrillesOperating Instructions
Max Input Power |
180 watts
vs
120 watts
|
Handle more power from your amplifier |
Woofer Size |
7 inches
vs
6.5 inches
|
Larger woofer |
Low Frequency Response |
40 Hz
vs
44 Hz
|
Generates deeper bass |
Sensitivity |
87 dB
vs
86 dB
|
Play louder with same amount of amplification power |
High Frequency Response |
35k Hz
vs
23k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Height |
375mm
vs
380mm
|
Easier to fit in smaller spaces |
Base Surface Area |
522cm2 (195x268mm)
vs
737cm2 (215x343mm)
|
Takes less floor space |
Price per pair* |
400USD
vs
4798USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Dynaudio Evoke 20 |
ELAC Debut 2.0 B6.2 |
Brand |
Dynaudio |
ELAC |
Speaker Type |
Floor-standing speaker |
Bookshelf speakers |
Power Range |
up to 180 watts |
up to 120 watts |
Sensitivity |
86 dB |
87 dB |
Impedance |
6 ohms |
6 ohms |
Frequency Response |
40-23k Hz |
44-35k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
7" |
6.5" |
Woofer Composition |
Magnesium Silicate Polymer |
Woven Aramid-Fiber |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1.1" |
1" |
Tweeter Type |
n/a |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
3200Hz |
2200Hz |
Firing Direction |
rear |
front |
Physical Specs |
|
|
Height |
380.0mm (15") |
375.0mm (14.8") |
Width |
215.0mm (8.5") |
195.0mm (7.7") |
Depth |
343.0mm (13.5") |
268.0mm (10.6") |
Weight |
9.90kg (21.8lbs) |
7.40kg (16.3lbs) |
Enclosure |
Bass Reflex |
Ported |
Finish |
MDF/Wood veneer |
MDF/Vinyl |
Available Colors |
Black |
Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
n/a |
24-28" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years (8 Years registered) |
3 Years |
Labor Warranty |
5 Years (8 Years registered) |
3 Years |