In this review, we will be comparing SX-50 and Bronze 2, two Passive Bookshelf speakers from Cambridge Audio and Monitor Audio. Let's have a brief look at the main features
of Cambridge SX-50 and Monitor Audio Bronze 2 first before getting into our more
detailed comparison.
What size room are the Cambridge SX-50 and Monitor Audio Bronze 2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Cambridge SX-50 and Monitor Audio Bronze 2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both SX-50 and Bronze 2 are 2-way speakers.
Driver |
Cambridge SX-50 |
Monitor Audio Bronze 2 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
SX-50 features a 1" Silk Dome Tweeter and 1 x 5.25" Treated paper Woofer . On the other hand, the Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz.
Frequency Response
SX-50 has a frequency range of 50-22k Hz whereas Bronze 2 has a frequency range of 42-30k Hz. With a minimum frequency of 42Hz, the Bronze 2 can go significantly deeper on the low side and provide stronger bass compared to the SX-50's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SX-50 and Bronze 2 have the same Impedance of 8 ohms and their sensitivity is also same at 90 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 2 features Post posts which make bi-amping or bi-wiring possible. SX-50 has a 5-way post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
SX-50 has a rear firing port whereas Bronze 2 has a front firing ports. Monitor Audio Bronze 2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Cambridge SX-50 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Cambridge SX-50's and Monitor Audio Bronze 2's external dimensions. Cambridge SX-50 has external dimensions of 225.0 x 161.0 x 240.0mm ( 8.8 x 6.3 x 9.4inch) whereas Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) .
Monitor Audio Bronze 2 is clearly the larger of the two speakers. Its body is 24mm wider, 125mm taller and 41mm deeper than Cambridge SX-50.
Below you can see the front view size comparison of Cambridge SX-50 and Monitor Audio Bronze 2 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Cambridge SX-50 is approximately 386.4cm2 / 59.9inch2 and base area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2. The SX-50 requires 26% less surface area than the Bronze 2 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Cambridge SX-50 weighs 3.00kg / 6.6lbs and the Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs. This makes the Bronze 2 77% heavier than the SX-50.
Here is a comparison of how SX-50 and Bronze 2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Cambridge SX-50?
Here are the items that are included inside the box of SX-50:
2 Bookshelf loudspeakers 2 Grilles 8 Self-adhesive feet 2 Foam port inserts Installation Guide
What's in the Box of Monitor Audio Bronze 2?
Here are the items that come with the Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
Height |
225mm
vs
350mm
|
Easier to fit in smaller spaces |
Base Surface Area |
386cm2 (161x240mm)
vs
519cm2 (185x281mm)
|
Takes less floor space |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
42 Hz
vs
50 Hz
|
Generates deeper bass |
High Frequency Response |
30k Hz
vs
22k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
General |
Cambridge Audio SX-50 |
Monitor Audio Bronze 2 |
Brand |
Cambridge Audio |
Monitor Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
10-100 watts |
30-100 watts |
Sensitivity |
90 dB |
90 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
50-22k Hz |
42-30k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
Treated paper |
C-CAM |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
3100Hz |
Firing Direction |
rear |
front |
Physical Specs |
|
|
Height |
225.0mm (8.9") |
350.0mm (13.8") |
Width |
161.0mm (6.3") |
185.0mm (7.3") |
Depth |
240.0mm (9.4") |
281.0mm (11.1") |
Weight |
3.00kg (6.6lbs) |
5.30kg (11.7lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Woodgrain vinyl |
MDF/Wood-grain vinyl |
Available Colors |
Black |
Walnut, White, Rosemah, Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
28-31" |
30-31" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |