In this review, we will be comparing 707 S2 and S15, two Passive Bookshelf speakers from Bowers Wilkins and Polk Audio. Let's have a brief look at the main features
of B&W 707 S2 and Polk S15 first before getting into our more
detailed comparison.
What size room are the B&W 707 S2 and Polk S15 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the B&W 707 S2 and Polk S15 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 707 S2 and S15 are 2-way speakers.
Driver |
B&W 707 S2 |
Polk S15 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
707 S2 features a 1" Decoupled Soft-Dome Tweeter and 1 x 5" Continuum Woofer . On the other hand, the S15 features a 1" Terylene Dome Tweeter and 1 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
707 S2 has a frequency range of 50-28k Hz whereas S15 has a frequency range of 50-40k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
707 S2 and S15 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. 707 S2 sensitivity is rated at 84 dB and the S15's is at 88 dB. This 4 dB difference makes the Polk S15 a more sensitive speaker compared to B&W 707 S2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
707 S2 features Binding post posts which make bi-amping or bi-wiring possible. S15 has a Pair of Binding Posts - Gold Plated which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both 707 S2 and S15 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 707 S2's and Polk S15's external dimensions. B&W 707 S2 has external dimensions of 280.0 x 165.0 x 276.0mm ( 11-inch x 6.5-inch x 10.9-inch) whereas Polk S15 has external dimensions of 304.8 x 190.0 x 260.4mm ( 12.0 x 7.4 x 10.2inch) .
B&W 707 S2 is 25mm narrower and 24.8mm shorter than Polk S15 but it is also 15.6mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 707 S2 is approximately 455.4cm2 / 70.6inch2 and base area of the Polk S15 is approximately 494.8cm2 / 76.7inch2. The 707 S2 requires 8% less surface area than the S15 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 707 S2 weighs 6.00kg / 13.2lbs and the Polk S15 weighs 5.90kg / 13lbs. This makes the 707 S2 2% heavier than the S15.
Here is a comparison of how 707 S2 and S15's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 707 S2?
Here are the items that are included inside the box of 707 S2:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps Manual Bowers & Wilkins brochureWarranty Information
What's in the Box of Polk S15?
Here are the items that come with the S15:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
280mm
vs
304mm
|
Easier to fit in smaller spaces |
Base Surface Area |
455cm2 (165x276mm)
vs
494cm2 (190x260mm)
|
Takes less floor space |
Sensitivity |
88 dB
vs
84 dB
|
Play louder with same amount of amplification power |
Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Price per pair* |
259USD
vs
1599USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Bowers & Wilkins 707 S2 |
Polk Audio Signature S15 |
Brand |
Bowers Wilkins |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
30-100 watts |
20-100 watts |
Sensitivity |
84 dB |
88 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
4.0 ohms |
n/a |
Frequency Response |
50-28k Hz |
50-40k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5" |
5.25" |
Woofer Composition |
Continuum |
Mica-reinforced polypropylene |
Woofer Surround Material |
Rubber |
Butyl rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Decoupled Soft-Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
2500Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
280.0mm (11") |
304.8mm (12") |
Width |
165.0mm (6.5") |
190.0mm (7.5") |
Depth |
276.0mm (10.9") |
260.4mm (10.3") |
Weight |
6.00kg (13.2lbs) |
5.90kg (13lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood Veneer |
Meddite MDF |
Available Colors |
Rosewood, Gloss Black, Satin White |
Black, Walnut, Brown Walnut |
Mounting Bracket |
No |
Keyhole |
Recommended Stand Height |
24-26" |
24-30" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |