In this review, we will be comparing 706 S3 and LINTON Heritage, two Passive Bookshelf speakers from Bowers Wilkins and Wharfedale. Let's have a brief look at the main features
of B&W 706 S3 and Wharfedale LINTON first before getting into our more
detailed comparison.
What size room are the B&W 706 S3 and Wharfedale LINTON speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the B&W 706 S3 and Wharfedale LINTON compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that 706 S3 is a 2-way design whereas the LINTON Heritage is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
B&W 706 S3 |
Wharfedale LINTON |
Driver Setup
|
2-way
|
3-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
1 x 5-inch |
Woofer
|
1 x 6.5-inch
|
1 x 8-inch
|
706 S3 features a 1" Decoupled Carbon Dome Tweeter and 1 x 6.5" Continuum Woofer . On the other hand, the LINTON Heritage features a 1" woven textile Soft-dome Tweeter , a 5" Midrange and 1 x 8" Woven Kevlar Woofer with a Crossover frequency at 630Hz and 2400Hz.
Frequency Response
706 S3 has a frequency range of 50-28k Hz whereas LINTON Heritage has a frequency range of 40-20k Hz. With a minimum frequency of 40Hz, the LINTON Heritage can go significantly deeper on the low side and provide stronger bass compared to the 706 S3's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
706 S3 is a 8 ohms speaker compared to the LINTON Heritage which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. 706 S3 sensitivity is rated at 88 dB and the LINTON Heritage's is rated at 90 dB. This 2 dB difference makes the Wharfedale LINTON a more sensitive speaker compared to B&W 706 S3, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
706 S3 can handle a max power of 200 watts RMS from the amp the whereas 706 S3 has a max power handling value of 120 watts RMS , 80 watts less than the LINTON Heritage.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
706 S3 features Binding post posts which make bi-amping or bi-wiring possible. LINTON Heritage has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both 706 S3 and LINTON Heritage have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 706 S3's and Wharfedale LINTON's external dimensions. B&W 706 S3 has external dimensions of 345.0 x 192.0 x 334.0mm ( 13.6-inch x 7.6-inch x 13.1-inch) whereas Wharfedale LINTON has external dimensions of 565.0 x 300.0 x 330.0mm ( 22.2 x 11.8 x 12.9inch) .
B&W 706 S3 is 108mm narrower and 220mm shorter than Wharfedale LINTON but it is also 4mm deeper.
Below you can see the front view size comparison of B&W 706 S3 and Wharfedale LINTON in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 706 S3 is approximately 641.3cm2 / 99.4inch2 and base area of the Wharfedale LINTON is approximately 990.0cm2 / 153.5inch2. The 706 S3 requires 35% less surface area than the LINTON Heritage which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 706 S3 weighs 8.42kg / 18.5lbs and the Wharfedale LINTON weighs 18.40kg / 40.5lbs. This makes the LINTON Heritage 119% heavier than the 706 S3.
Here is a comparison of how 706 S3 and LINTON Heritage's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 706 S3?
Here are the items that are included inside the box of 706 S3:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps Manual Bowers & Wilkins brochureWarranty Information
What's in the Box of Wharfedale LINTON?
Here are the items that come with the LINTON Heritage:
Bookshelf loudspeaker Grille (pre-installed) 4 Self-adhesive rubber feet Pair of white gloves User's Manual
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Minimum Impedance |
3.7 ohms
vs
3.5 ohms
|
Very low impedance levels puts more pressure on amplifier |
High Frequency Response |
28k Hz
vs
20k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
345mm
vs
565mm
|
Easier to fit in smaller spaces |
Base Surface Area |
641cm2 (192x334mm)
vs
990cm2 (300x330mm)
|
Takes less floor space |
Max Input Power |
200 watts
vs
120 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
Low Frequency Response |
40 Hz
vs
50 Hz
|
Generates deeper bass |
Price per pair* |
1500USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Bowers & Wilkins 706 S3 |
Wharfedale LINTON Heritage |
Brand |
Bowers Wilkins |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
30-120 watts |
25-200 watts |
Sensitivity |
88 dB |
90 dB |
Impedance |
8 ohms |
6 ohms |
Impedance |
3.7 ohms |
3.5 ohms |
Frequency Response |
50-28k Hz |
40-20k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
8" |
Woofer Composition |
Continuum |
Woven Kevlar |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Decoupled Carbon Dome |
Soft-dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
5" |
Crossover Frequency |
n/a |
630Hz and 2400Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
345.0mm (13.6") |
565.0mm (22.2") |
Width |
192.0mm (7.6") |
300.0mm (11.8") |
Depth |
334.0mm (13.1") |
330.0mm (13") |
Weight |
8.42kg (18.5lbs) |
18.40kg (40.5lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood veneer |
MDF/Wood Veneer |
Available Colors |
Gloss Black,Satin White,Mocha,Rosenut |
Walnut, Red Mahogany, Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-26" |
18-22" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |