In this review, we will be comparing 705 S3 and 606 S2 AE, two Passive Bookshelf speakers by Bowers Wilkins Let's have a brief look at the main features
of B&W 705 S3 and B&W 606 S2 first before getting into our more
detailed comparison.
What size room are the B&W 705 S3 and B&W 606 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the B&W 705 S3 and B&W 606 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 705 S3 and 606 S2 AE are 2-way speakers.
Driver |
B&W 705 S3 |
B&W 606 S2 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
705 S3 features a 1" Decoupled Carbon Dome Tweeter and 1 x 6.5" Continuum Woofer . On the other hand, the 606 S2 AE features a 1" Aluminum Decoupled Double Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
705 S3 has a frequency range of 50-28k Hz whereas 606 S2 AE has a frequency range of 52-28k Hz. With a minimum frequency of 50Hz, the 705 S3 can go slightly deeper then the 606 S2 AE's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
705 S3 and 606 S2 AE have the same Impedance of 8 ohms and their sensitivity is also same at 88 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
705 S3 and 606 S2 AE has the same power range of 30-120 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both 705 S3 and 606 S2 AE features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Both 705 S3 and 606 S2 AE have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 705 S3's and B&W 606 S2's external dimensions. B&W 705 S3 has external dimensions of 413.0 x 192.0 x 297.0mm ( 16.3-inch x 7.6-inch x 13.3-inch) whereas B&W 606 S2 has external dimensions of 347.0 x 191.0 x 326.0mm ( 13-5/8 x 7-1/2 x 12-13/16inch) .
B&W 606 S2 is 1mm narrower and 66mm shorter than B&W 705 S3 but it is also 29mm deeper.
Below you can see the front view size comparison of B&W 705 S3 and B&W 606 S2 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 705 S3 is approximately 570.2cm2 / 88.4inch2 and base area of the B&W 606 S2 is approximately 622.7cm2 / 96.5inch2. The 705 S3 requires 8% less surface area than the 606 S2 AE which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 705 S3 weighs 9.58kg / 21.1lbs and the B&W 606 S2 weighs 6.90kg / 15.2lbs. This makes the 705 S3 39% heavier than the 606 S2 AE.
Here is a comparison of how 705 S3 and 606 S2 AE's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 705 S3?
Here are the items that are included inside the box of 705 S3:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps Manual Bowers & Wilkins brochureWarranty Information
What's in the Box of B&W 606 S2?
Here are the items that come with the 606 S2 AE:
2 Bookshelf loudspeakers 2 Grilles 2 Two-piece foam port plugs 8 Self-adhesive rubber feet 4 Jumper-straps (pre-installed) Manual Bowers & Wilkins brochure Warranty Information
Low Frequency Response |
50 Hz
vs
52 Hz
|
Generates deeper bass |
Base Surface Area |
570cm2 (192x297mm)
vs
622cm2 (191x326mm)
|
Takes less floor space |
Minimum Impedance |
3.7 ohms
vs
3.1 ohms
|
Very low impedance levels puts more pressure on amplifier |
Height |
347mm
vs
413mm
|
Easier to fit in smaller spaces |
Price per pair* |
999USD
vs
3398USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Bowers & Wilkins 705 S3 |
Bowers & Wilkins 606 S2 Anniversary Edition |
Brand |
Bowers Wilkins |
Bowers Wilkins |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
30-120 watts |
30-120 watts |
Sensitivity |
88 dB |
88 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
3.1 ohms |
3.7 ohms |
Frequency Response |
50-28k Hz |
52-28k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Continuum |
Continuum |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Decoupled Carbon Dome |
Decoupled Double Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
413.0mm (16.3") |
347.0mm (13.7") |
Width |
192.0mm (7.6") |
191.0mm (7.5") |
Depth |
297.0mm (11.7") |
326.0mm (12.8") |
Weight |
9.58kg (21.1lbs) |
6.90kg (15.2lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood veneer |
MDF/Vinyl |
Available Colors |
Gloss Black,Satin White,Mocha,Rosenut |
Matte Black, Matte White, Oak, Red Cherry |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-26" |
24-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |